|
|
Post by SKR on May 9, 2015 18:45:00 GMT -7
Not sure who has built one of these yet but I thought I'd share a little info on what I've found playing around between classes today.
I tried a 3 ohm arm with BSRT's Neo drag motor magnets and I was able to run a .35 at around 40 mph at Drag City. As I expected it topped out before half track. I then switched over to Level 10 poly mags and was able to run low .33's at over 50 mph. Gearing was 9/20 on both runs. I'm thinking Polys might be the way to go in this class with the 3 ohm armature restriction. I'll have to see if I have a 10T pinion and try the Neo's again.
|
|
|
|
Post by Phantom B.S.E. on May 9, 2015 19:30:23 GMT -7
I have built one so far and have poly mags in it, but don't be afraid to change tire size as well as gears.
|
|
|
|
Post by SKR on May 9, 2015 19:37:57 GMT -7
will do. I was only running .472" tires.
|
|
|
|
Post by Eagle Racing on May 9, 2015 20:29:05 GMT -7
I have all my parts just have not put it all together yet. I am hand winding two motors for this class. As far as tires mine are .475. I have neos and polys to try. This should be a real fun class.
|
|
|
|
Post by Scottman on Jun 10, 2015 12:25:59 GMT -7
So basically Modern Funny car is stock motor,havent been on here in awhile for got my password for the boards,LOL
|
|
|
|
Post by jjwallace on Jun 10, 2015 15:58:48 GMT -7
So basically Modern Funny car is stock motor,havent been on here in awhile for got my password for the boards,LOL Hey Scottman....... Motor for Modern Funny car cannot be less than 3ohm, it can be custom wind, and have timing. Here is the link for the N3 Class rules which are being used in the M/FC build. Thanks for asking and hope to see you in the race. If you have anymore questions just ask. ninjatekprojects.com/rule$/Nline/N3/N3.pdf |
|
|
|
Post by SKR on Jun 29, 2015 18:53:18 GMT -7
I know it was posted that divorced front wheels are allowed. Do they have to roll? There is not much room to work with around the pick up system.
|
|
|
|
Post by Eagle Racing on Jun 29, 2015 20:37:55 GMT -7
No they don't have to roll. I understand what you are saying. However it can be done. I do have mine setup to touch and roll.
|
|
