|
|
Post by 440gtx on Mar 20, 2017 11:51:15 GMT -7
How are you guys mounting wheelie bars to your magna/x-traction chassis? Sorry if this has already been addressed in another thread. I did look around a bit and didn't find anything. I have an idea but I don't want to reinvent the wheel if there is already a proven design.
thanks
Matt
|
|
|
|
Post by nosubfor3 on Mar 20, 2017 14:48:08 GMT -7
Matt I use a piece of brass piano wire.I forget the size.I then drill two holes in the back of the chassis the size of the wire,slip the wheelie bar in and then epoxy them to the chassis.
|
|
|
|
Post by 440gtx on Mar 24, 2017 4:48:26 GMT -7
Matt I use a piece of brass piano wire.I forget the size.I then drill two holes in the back of the chassis the size of the wire,slip the wheelie bar in and then epoxy them to the chassis. I had thought about drilling the chassis but i don't really want to permanently attach them to the chassis. I run everything at 13.8v here and I don't need them at that voltage. thanks Matt |
|
