|
|
Post by pete on Jul 28, 2019 6:41:42 GMT -7
Wizzard's release of a new car is just days away. Is there a approval that must happen before the chassis is allowed into competition at events?
|
|
|
|
Post by jjwallace on Jul 28, 2019 11:03:34 GMT -7
If the car from Wizzard meets the Class requirements it would be allowed. We just need to be able to determine what parts are being used. Wizzard would have all of that information available.
|
|
|
|
Post by pete on Jul 28, 2019 11:49:30 GMT -7
Good. The car will come with all stock parts legal to compete in HOPRA. Ceramic motor and traction, C4 motor and traction, level ten motors and beyond.
If any info is needed I would be happy to gather any to answer.
I will be working with this chassis and pleased to hear its tentative acceptance.
|
|
|
|
Post by jjwallace on Jul 28, 2019 12:16:37 GMT -7
If you are planning on running it in September, it will need to meet the criteria for Inline Super Stock Class. NTRA rules link: nitroslots.com/page/ntra-rules |
|
|
|
Post by pete on Jul 28, 2019 12:28:04 GMT -7
JJ
Please define Factory Grade only in the stock inline traction rule.
|
|
|
|
Post by pete on Jul 28, 2019 12:42:03 GMT -7
I realize that Super stock rules are for the race in September. I ask about stock rules for a clarification of that rule. Not sure why its written that way.
|
|
|
|
Post by jjwallace on Jul 28, 2019 13:52:38 GMT -7
JJ Please define Factory Grade only in the stock inline traction rule. "Factory grade" is listed for the traction magnets. That would basically mean stock or equivalent to whatever came stock. Traction magnets for the stock chassis would not be as critical as motor magnets though. |
|
|
|
Post by dave632 on Jul 28, 2019 14:03:43 GMT -7
It can be hard to grade magnets at times. You can take a small dot neo magnet and it will read very high on a gauss meter. It will however not be
as strong as a larger ceramic or poly magnet. The mass of the magnet makes a big difference.
Here is an example I learned the hard way.
I was building another Unlimited inline and Scale Auto/BSRT had so called light weight Neo motor magnet. It cost twice as much as the regular
Neo magnet. I gave it a try and what a disappointment. It read the same on my gauss meter but it had half the mass. It was a real bummer as it
ran bad in anything I tried it in and cost 40.00 a real piece of junk. I know few here build unlimiteds but DON'T buy those motor mags. I am going to post this in a
separate thread as I don't want anyone else to make that mistake.
|
|
|
|
Post by jjwallace on Jul 28, 2019 15:28:40 GMT -7
Good. The car will come with all stock parts legal to compete in HOPRA. Ceramic motor and traction, C4 motor and traction, level ten motors and beyond. If any info is needed I would be happy to gather any to answer. I will be working with this chassis and pleased to hear its tentative acceptance. Pete where can we find some information on this? I did not see anything on the website, but I could be missing it somehow. Thanks. |
|
|
|
Post by pete on Jul 28, 2019 21:48:34 GMT -7
JJ
The latest information can been seen on Wizzard's facebook page. There is a topic on SCI with early proto type photo's.
It tics many boxes for a performance chassis. I have seen the car and looking forward to get my wrenches tuning on it.
Its fast.
|
|
|
|
Post by jjwallace on Jul 29, 2019 5:46:24 GMT -7
JJ The latest information can been seen on Wizzard's facebook page. There is a topic on SCI with early proto type photo's. It tics many boxes for a performance chassis. I have seen the car and looking forward to get my wrenches tuning on it. Its fast. Thanks Pete. I found the info. on SCI, but unfortunately I don't do Facebook very much. I figured that's where the info. would be. I will check that out. I like the Wizzard products and this chassis sounds really good. |
|
|
|
Post by ecbill on Jul 29, 2019 6:29:02 GMT -7
www.facebook.com/WizzardHO/The Fusion looks a lot like the G3 and Viper chassis with a more user friendly endbell. Brushes are on the sides so it may use Tyco style arms.
|
|
|
|
Post by jjwallace on Jul 29, 2019 7:25:22 GMT -7
www.facebook.com/WizzardHO/The Fusion looks a lot like the G3 and Viper chassis with a more user friendly endbell. Brushes are on the sides so it may use Tyco style arms. Thank you Bill. |
|
|
|
Post by pete on Jul 30, 2019 12:28:00 GMT -7
The Storm is approaching 20 years old. Over the last three years Wizzard was doing research on how to get an increase of RPM and handling for the storm chassis. One of the sparks that started the fire for the fusion is the square brush. The storm hit a wall on that concept. While the Fusion shares many look alike aspects of the modern HO car, it breaks ground on a new idea in design. Taking from 1/24th and HO it brings parts of the best designs from many places into one package.
As with any new car I think a learning curve will apply. I can tell you that even in proto type form, the Fusion was close to track record track times in testing.
Im looking forward to its arrival.
|
|
|
|
Post by dave632 on Jul 30, 2019 13:17:38 GMT -7
The motor brush spring is a lot more accessible on this chassis, looks good.
|
|
