|
|
Post by Eagle Racing on Jan 15, 2019 6:31:08 GMT -7
Here is another photo of an AW chassis that I have modified. I call this one my 4G Plus. This chassis allows me to snap the rear axle in and out without having to remove the entire rear assembly. The big add to this chassis is it now has adjustable traction magnets.
|
|
|
|
Post by GTS on Jan 15, 2019 7:28:24 GMT -7
Wow! This is really cool! Will this 4G+ version be on your "production" list someday? Also, it might be common knowledge for some but not me. What is the origination of the blue tips on the green wire armature (in the photo) ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 15, 2019 9:12:04 GMT -7
blue tip green wire Aurora armatures were in the 4-gear rails and available on blister packs at your favorite hobby store.
not quite as powerful as "mean green" armatures but much better then the 14 OHM red/red or red/copper armatures.
if I recall, the blue tip green wire arms were about 7 OHMs.
green tip green wire and green tip copper wire arms(mean greens) run about 6 OHMs with a few less than that.
red tip green wire ( mostly associated with Tuff Ones ) were around 7 OHM too I think.
|
|
|
|
Post by dave632 on Jan 15, 2019 10:25:05 GMT -7
I believe Al is right on those armatures.
|
|
|
|
Post by GTS on Jan 15, 2019 12:30:02 GMT -7
Thanks Al!
Thanks Dave!
|
|
|
|
Post by Eagle Racing on Jan 15, 2019 13:53:44 GMT -7
Wow! This is really cool! Will this 4G+ version be on your "production" list someday? Also, it might be common knowledge for some but not me. What is the origination of the blue tips on the green wire armature (in the photo) ?
Thank you sir, and yes it will be for sale as will the Super 3 Plus. Al and Dave are correct on the blue tip green wire arm, except that armature. That armature is one of my custom winds. I paint all of my custom winds French Blue. That is a 4 ohm armature. |
|
|
|
Post by GTS on Jan 15, 2019 14:43:55 GMT -7
And thank you for the clarification.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 15, 2019 16:06:39 GMT -7
|
|
|
|
Post by Eagle Racing on Jan 22, 2019 6:25:14 GMT -7
For the racers that have emailed me for chassis I am back. As I told you I have been in Utah riding snowmobiles at 10,000 feet. Give me a couple more days to get things together around my place and I will contact you. My better half and me, one of my nieces and she was mad at her sister for going to fast. They drag race snowmobiles to I asked if there was any racing close, but no luck. 
|
|
|
|
Post by Eagle Racing on Jan 31, 2019 5:04:48 GMT -7
Race cars leave today, no time to check them out. Busy with chassis builds hope they run....  Looking forward to racing on such an awesome track.
|
|
|
|
Post by GTS on Jan 31, 2019 5:43:45 GMT -7
Wow! Those are cool! Can't wait till race day!!!  |
|
|
|
Post by Eagle Racing on Feb 8, 2019 7:04:23 GMT -7
Here is my resin cast Ford Pinto pro stock unfinished setting on my carbon fiber chassis. The wheels in this picture are Vincent wheels, I cut down. I then bonded Jel Claw tires to the rims. As you can see they tuck easily under the body. All my kits are now ready to run all you have to do is paint the body.
|
|
|
|
Post by AJR on Feb 8, 2019 10:07:20 GMT -7
Love that body.......always have!
|
|
|
|
Post by Eagle Racing on Feb 24, 2019 10:28:51 GMT -7
Here are a couple RTR setups I am doing for Gale. Just have to install the motors and test and they are ready. Should go out early next week Gale. Thank you for the order sir. For those that don't know I only do RTR (ready to run) kits now. All you have to do is finish the body and of course tune it.
|
|
|
|
Post by GTS on Feb 24, 2019 13:08:41 GMT -7
Sah-wheet!  Thanks for the update!
Gettin' way too anxious now  |
|
Looking forward to racing on such an awesome track. 
