|
Post by skillet on Sept 5, 2022 13:35:54 GMT -7
As soon as I start going over board just let me know...I need this in a stencil in a bad way...alot of them ha ha...I can redraw this also if you think it's doable
|
|
|
Post by ecbill on Sept 5, 2022 15:02:59 GMT -7
As soon as I start going over board just let me know...I need this in a stencil in a bad way...alot of them ha ha...I can redraw this also if you think it's doable The program can copy most drawings. It works best with smooth lines and sharp color contrasts. The pic above has jagged edges, and the program will copy it as is. The resulting stencil would have rough edges like a saw blade. In most cases a nice crisp smooth edge is preferred. The smooth edges will also cut faster and cleaner. If the red and black were solid uniform colors, it would produce better results. The program used to have a smooth feature, but recent software updates did away with it. Seems like software updates always screw something up. If you do go through the effort to redraw it, colors are not necessary. Outlines of the oval and face should be sufficient.
|
|
|
Post by skillet on Sept 6, 2022 18:09:02 GMT -7
I will definitely redraw it. You have just made my day Bill
|
|
|
Post by skillet on Sept 14, 2022 21:47:51 GMT -7
How about this picture Bill any good ?
|
|
|
Post by ecbill on Sept 15, 2022 12:14:43 GMT -7
How about this picture Bill any good ? Outstanding! Definitely something I can work with. What kind of sizes are you looking for?
|
|
|
Post by sandfly on Sept 15, 2022 12:23:48 GMT -7
How about this picture Bill any good ? Looks like a bit from a holden logo, go you GM boys.
|
|
|
Post by skillet on Sept 16, 2022 0:42:36 GMT -7
Roof or door size, or smaller or any thing you can do Bill. It's the Slottech Cat. I want to do some Slottech custom paint jobs for my thundercat chassis. I forsee a black and red corvette in the near future...
|
|
|
Post by skillet on Sept 16, 2022 1:13:11 GMT -7
Got the chevy done. Sandfly, I ended up gluing in the window all the way around. It's a one piece window. That may add some strength to that thin body section in the rear quarters. Hard to get a good picture of how it looks in person. I'll stick it in the sun tomorrow and see if I can capture the flames.
|
|
|
Post by jjwallace on Sept 16, 2022 7:54:24 GMT -7
Very nice work Sam! Nice and slick for sure! What type of clear are you using and are you sending that to the race?
|
|
|
Post by hairycanary on Sept 16, 2022 10:48:18 GMT -7
Looking Awesome Sam !! Very Slippery the slipperyness alone should be good for a couple hundredths😁
|
|
|
Post by skillet on Sept 16, 2022 11:40:45 GMT -7
It's that dupli color clear from autozone. It came out so shiny because I had to wet sand the crap out of it and reclear to get the flame out- line in the paint to level out.
I don't know the future of this car. It was built and painted from pure frustration lol. Working on cars for the race, when things start going sideways I stopped and used this to calm me down. I had no idea how soothing wet sanding could be.
|
|
|
Post by kiwidave on Sept 16, 2022 14:24:59 GMT -7
Really nice car and great work. I agree Sam, most people complain about sanding I enjoy sanding and prep work!
|
|
|
Post by ecbill on Sept 19, 2022 18:19:01 GMT -7
Got the chevy done. Sandfly, I ended up gluing in the window all the way around. It's a one piece window. That may add some strength to that thin body section in the rear quarters. Hard to get a good picture of how it looks in person. I'll stick it in the sun tomorrow and see if I can capture the flames. Finally saw this on a screen bigger than a phone. Awesome clear and lots of sparkle!
|
|
|
Post by ecbill on Sept 19, 2022 18:20:46 GMT -7
How about this picture Bill any good ? Looks like a bit from a holden logo, go you GM boys. It would be cool to see the Holden logo, if you could dig one up!
|
|
|
Post by skillet on Sept 19, 2022 19:23:31 GMT -7
Here you go Bill
|
|