|
Post by slotman55 on Dec 26, 2010 15:18:48 GMT -7
What runs in doorslammer and what are the rules?
|
|
|
Post by SKR on Dec 26, 2010 18:10:48 GMT -7
Here are the rules slotman,
Door Slammer 4 Gear Chassis
Minimum weight: TBD
Armatures: 5 Ohm Minimum. No Rewind, Dewinding. Balancing and Polishing allowed.
Magnets: Ceramic grade onlly
Wheels/Tires: Silly foams allowed. Tires must be black.
Electrical: Unrestricted. Braids and shunts are allowed
Chassis: AW and Aurora are legal. Chassis may be cut and lighten. Motor Magnet area may be modified. Wheelie bars allowed.
Traction magnets: Only 2 allowed
Gears: Unrestricted. Must be readily available.
Body: Resin, Plastic only. No Lexan bodies. Wings, hood scoops etc.. may be made out of styrene, balsa or lexan.
Full fender-ed Car or Trucks bodies with Roof (no Roadsters/Convertibles).
No Funny Car bodies
Hood Ornaments: Must have at least a factory hood scoop. Injectors, Pro Style Hood Scoops, Turbos are encouraged but not necessary.
Air Spoil: Must have at least a factory rear deck spoiler. Pro Stock Style, Pro Mod Style and detached wings are encouraged but not necessary to compete.
Parachute: Recommend one but will not disqualify a car for not having one.
The main reason for the minimum car weight is to get guys detailing them as much as possible. For anybody running this class at my proxy race..... I have plenty of these items (Scoops, Wings & Parachutes) that are yours for just asking. Weight is still to be determined.
|
|
|
Post by slotman55 on Dec 26, 2010 19:32:37 GMT -7
Thanks Sam sounds like a 4 gear promod.
|
|
|
Post by scottman2007 on Jan 5, 2011 13:00:36 GMT -7
Ok Guys were are all the entries at??? lets fill that list up.
|
|
|
Post by eddiebee on Feb 1, 2011 11:26:29 GMT -7
Put me in for one of each and I will try to get them all ready. I need to get my hands on 2 bodies for the 4 gear door slammer class.
|
|
|
Post by ninjatek on Feb 1, 2011 12:15:40 GMT -7
Put me in for one of each and I will try to get them all ready. I need to get my hands on 2 bodies for the 4 gear door slammer class. You're in each class at number 10.
|
|
|
Post by bondoman2k on Feb 9, 2011 18:33:52 GMT -7
Been so busy here between gettin ready to move, and building my cars..I completely forgot to sign up! Put me down for a Ratt, a Gasser and a Doorslammer! ;D HOPEFULLY they'll run as good as they look! Ron (Bondo)
|
|
|
Post by ninjatek on Feb 9, 2011 19:22:02 GMT -7
. . . I completely forgot to sign up! Put me down for a Ratt, a Gasser and a Doorslammer! ;D HOPEFULLY they'll run as good as they look! Ron (Bondo) You're in as entry #12 for Ratt, Gasser, and Doorslammer.
|
|
|
Post by SKR on Feb 27, 2011 19:24:47 GMT -7
I sent all entries my address via private message. Let me know if you did not receive it.
Thanks!
|
|
|
Post by hairycanary on Feb 27, 2011 23:53:31 GMT -7
I'am a little late but sign me up for a Door Slammer and a gasser. Kind of started one on Saturday. Hope to finish it in time. Been busy.
Thanks Rick
|
|
|
Post by ninjatek on Feb 28, 2011 9:36:55 GMT -7
I'am a little late but sign me up for a Door Slammer and a gasser. Kind of started one on Saturday. Hope to finish it in time. Been busy. Thanks Rick You are in at entry #14 for Door Slammer and Gasser classes. Could another NTRA Quarterly watermark car be in the makings?
|
|
|
Post by SKR on Mar 6, 2011 10:27:51 GMT -7
Welcome Richard and Demon (R/T Racing). Just few numbers to throw at you guys. A few guys sent in cars for the test and tune. I didn't post any results other than sending Private Messages to the owners. Low .5's was the quick E/T's in Gasser by a couple of different guys from New York and Idaho. Maybe we will see some E/T's in the .4's next weekend. D/S saw a high .6's and in the 20's for MPH. One week till race time. and it's not too late to sign up. If you can get a car here in time, Let me know and I'll send you my address and entry info. Sam
|
|
|
Post by sst1610 on Mar 6, 2011 10:39:32 GMT -7
The hauler is on its way Sam, my door slammer entry didn't make it tho. Looking forward to the race.
Dave
|
|
|
Post by eddiebee on Mar 8, 2011 10:25:12 GMT -7
My hauler is on its way also , via "the big brown truck". 4 cars making a cross country treck. Hope UPS give me better service than the last time I shipped with them!!
|
|
|
Post by scottman2007 on Mar 9, 2011 9:48:58 GMT -7
Well I really cut it alittle too close ,got the cars done last night at 9PM..Made a call to a friend Connie Kallita and leased one of his Planes and he will be landing in Colorado sometime mid morning tomorrow ,and he said my cars would be there around 12noon.My cars might not be very fast this time,but Dang they look Good,LOL
|
|