|
|
Post by SKR on Oct 19, 2008 16:24:27 GMT -7
Here is a Life Like Dodge Intrepid Nascar that I've converted into a P/S. After the add ons of the rear air foil and hood scoop I primered the body and then sprayed a silver base coat over it. After sitting on the bench for a few weeks I was able to return to this project. After laying down some masking tape along the side I then drew out a flame pattern.  Next I used my X-ACTO knife to cut along the lines  I then masked off the rest of the body and sprayed candy blue over the unmasked area. I also added some black along the area where the flames are. The black is hard to see now but will show up better after a clear coat is added.   |
|
|
|
Post by da big ragu on Oct 19, 2008 17:06:21 GMT -7
 sam you are doing it again it looks good just like this!
|
|
|
|
Post by SKR on Oct 29, 2008 12:13:39 GMT -7
Here is another MM/PS body option for the Dodge fans. This one is made out of the Dodge Charger body that Auto World sells. After filling in the door lines, cutting off the mirrors and door pillars. It kind of looks like the Dodge Avenger P/S.  Still lots to do to make it smoother. Almost looks like a modern 68-69 Barracuda.  One of my favorite web sites www.Gregrusselldesign.com |
|
|
|
Post by hilltopspeedway on Oct 29, 2008 17:17:27 GMT -7
Sam, I wish you hadn't shown me that websight!!! But thanks!!!
Too many cool ideas...RM
|
|
|
|
Post by sst1610 on Oct 29, 2008 17:27:18 GMT -7
I'm not a big mopar fan but that charger/avenger looks sweet!
|
|
|
|
Post by Demon340 on Oct 29, 2008 18:12:36 GMT -7
SAM Well you done it now. I saw the charger and said thats the car for me. I always thought the avenger was the best looking MOPAR PRO STOCK ever. Your charger is close to it cant wait to see it done.  TOM |
|
|
|
Post by SKR on Oct 30, 2008 5:38:17 GMT -7
Thanks! I like the looks of the Charger also. I might have to switch over to Mopar. This one comes with a NOS bottle in the fuel tank |
|
iowajeff
Pro Stock
Jeff Sandage- Iowa
Posts: 114
|
Post by iowajeff on Oct 30, 2008 18:02:13 GMT -7
Did you cut the windows out of that nascar body? If you did what did you use?
iowajeff
|
|
|
|
Post by Demon340 on Oct 30, 2008 19:11:14 GMT -7
SAM
You just haaaaaad to bring up the NOS deal. Hey what ever it
takes to win. You didnt find the bottle in richards car did you.
Wish you found one in 440s car could have DQ him. ;D ;D ;D ;D
DEMON
|
|
|
|
Post by SKR on Oct 30, 2008 19:18:00 GMT -7
LOL, No problems with the F/C cars. It's just the P/S guys you have to watch.
Jeff, I used a small round grinding stone on my Dremel. I trimmed out as close as I could then used a X-Acto knife for the rest of it. Be careful if you use a dremel. The plastic builds up on the stone and makes a bigger grinding surface as you trim.
|
|
|
|
Post by 440gtx on Oct 30, 2008 20:46:14 GMT -7
The rules DIDN'T say that you can't have NOS! I mean...uh....You know.... IF I wanted to use NOS I could have.
|
|
|
|
Post by nightrider on Oct 30, 2008 20:49:29 GMT -7
looking good SAM...
got to fuel beside Gary Scelzi's hauler on the Kansas Turnpike,, talked to the driver they were headed for Las Vegas.....
Chris
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 30, 2008 23:11:50 GMT -7
sweet looking charger!!!  and all another mopar cars you made so far!!! Wes |
|
|
|
Post by SKR on Nov 14, 2008 9:25:17 GMT -7
|
|
|
|
Post by SKR on Nov 15, 2008 10:07:31 GMT -7
Here's the Chavenger...... uh I mean Charger. Awaiting decals and a clear coat.  |
|
and all another mopar cars you made so far!!!