|
|
Post by kiwidave on Mar 31, 2013 15:39:53 GMT -7
Are any of you guys running plastic track using power taps/jumpers. I'm considering one power tap half way down my track before I fix everything down again. If you have done this can you post some how to tips please?
|
|
|
|
Post by TGM2054 on Apr 1, 2013 6:27:25 GMT -7
Dave, I built my track in three sections so it would be portable and I could convert it from 1/8 mi to 1/4 mile.Each section has jumpers in it. All I did was solder the wire to the track rail from the bottom side. If you turn a piece of track over you'll see the rails from the bottom side,thats where I soldered
|
|
