Post by SKR on Dec 17, 2008 17:27:39 GMT -7
Same rules as MM/PS except that this is a stock armature class. Also we've allowed Styrene and Lexan bodies in this class.
ISRA
Pro Stock Truck
Class will be heads up run on a Pro Tree (.400)
- Inline Chassis. Tyco, Bsrt, Wizzard, Slottech etc.......
- 1990 or newer Truck bodies. Bodies may be made of hard plastic, Resin, Styrene or Lexan.
- Bodies must have a hood scoop and front and rear window
- Only Stock Armatures allowed. No de-winding, No commutator advancing/tweaking of any sort. Balancing is allowed. Minimum ohm reading of armature shall be no lower than 5.8 ohms
- Polymer traction magnets are allowed. Traction magnets can be sanded and cut.
- Motor magnets, any ceramic
- Electrical, unlimited no restrictions. Must be readily available.
- Only Armature bushing allowed (Plastic, bronze, brass) No Ball Bearings allowed.
- Any tire and wheels
- Gears, No restrictions, must be readily available
- Chassis can be cut, sanded, stiffen
- Wheelie bars are allowed
- Weight, 21 grams
ISRA
Pro Stock Truck
Class will be heads up run on a Pro Tree (.400)
- Inline Chassis. Tyco, Bsrt, Wizzard, Slottech etc.......
- 1990 or newer Truck bodies. Bodies may be made of hard plastic, Resin, Styrene or Lexan.
- Bodies must have a hood scoop and front and rear window
- Only Stock Armatures allowed. No de-winding, No commutator advancing/tweaking of any sort. Balancing is allowed. Minimum ohm reading of armature shall be no lower than 5.8 ohms
- Polymer traction magnets are allowed. Traction magnets can be sanded and cut.
- Motor magnets, any ceramic
- Electrical, unlimited no restrictions. Must be readily available.
- Only Armature bushing allowed (Plastic, bronze, brass) No Ball Bearings allowed.
- Any tire and wheels
- Gears, No restrictions, must be readily available
- Chassis can be cut, sanded, stiffen
- Wheelie bars are allowed
- Weight, 21 grams
