Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2009 18:57:26 GMT -7
What is the lane spacing on lifelike track?Is it the widest lane spacing of all production plastic track?I know tyco track is 1/8 inch wider than tomy afx track. thanks
Dana,
|
|
|
|
Post by SKR on Sept 3, 2009 19:49:43 GMT -7
Not sure Dana. That is a good question for guys building a Drag Strip out of 15" sections. If you had enough sections you could double them up like a four lane track and fill in the two closest lanes. Just a thought.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2009 16:08:27 GMT -7
Thanks for that idea.I have enough track to double up I bought some bondo this afternoon and I'm getting ready to go to work on filling the inner lanes and sand them smooth and then paint.Thanks for the help.
|
|
|
|
Post by allstarhr on Sept 5, 2009 17:17:55 GMT -7
If you haven't slapped on the Bond yet... I have a portable track that I bought and the guy who made it used doubled up plastic track also. However he put a 1/4" x 1" rectangular trim board between the two plastic tracks to space them further apart. Then he has it where the two outer lanes can be used as return roads. It's 28' long so all it takes is a guy sitting at the top end to turn the cars around on the outside lanes and the driver can drive his car back. Lousy weight loss program though.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2009 23:09:00 GMT -7
I ended up not doing the bondo too much work.I doubled the 15" straights all the way and put down yellow penstriping down the middle
and it looks good I'll post some pictures when it's done.Does anyone have a drag timing system they want to sell?That's all I lack now other than doing the scenery .Thanks again guys
|
|
