|
|
Post by Joe65SkylarkGS on May 23, 2011 15:22:32 GMT -7
The detail work and that finish!!!! Wow I can see myself in that hood!!!! Love the detail on the blower/injector. Amazing.  |
|
|
|
Post by SKR on Nov 5, 2012 20:18:29 GMT -7
Here are a few that I clear coated yesterday. I'll put the finishing touches on them this weekend. I finally got around to doing 4 of the Hairy Canary bodies I had bought about a year and a half ago. I have to say Rick, these are some kick ass bodies. Minimal clean up and great detail. Hairy Canary Nostalgia Funny Cars and a Pro Mod Willys  RRR Gasser   SKR Resin PS-1C.   |
|
|
|
Post by sst1610 on Nov 6, 2012 12:15:26 GMT -7
Looks great Sam. What clear you using?
|
|
ol55
Pro Stock
Posts: 117
|
Post by ol55 on Nov 6, 2012 13:16:48 GMT -7
good lookin cars Sam
|
|
|
|
Post by SKR on Nov 7, 2012 19:13:23 GMT -7
Thanks guys.
I'm using a 2 part clear from U-Tech. I picked it up at an Auto Body paint supply store. Comes out smooth as glass.
|
|
|
|
Post by SKR on Nov 13, 2012 19:15:45 GMT -7
going old school with this Henry J. After I taped it off I put on a coat of silver followed some candy red and yellow. After I pulled the tape off, I sprayed a light coat of holographic flakes over the whole body. I'll add some decals and a clear coat this weekend. Taped off the body and cut out my design using an X-Acto knife. Tamiya tape and went through a few new blades.   |
|
|
|
Post by kdog on Nov 14, 2012 15:06:28 GMT -7
Sam you are the MAN...when it comes to masking off these paint jobs.....forget about it...Sam is the man...
Very nice work...
DOG
|
|
|
|
Post by Eagle Racing on Nov 14, 2012 15:53:57 GMT -7
SWEET !!
|
|
|
|
Post by kiwidave on Nov 14, 2012 16:54:56 GMT -7
Stunning paint work! Amazing masking work!
|
|
|
|
Post by SKR on Dec 27, 2013 16:39:30 GMT -7
|
|
|
|
Post by Phantom B.S.E. on Dec 28, 2013 8:19:30 GMT -7
That's a great looking Camaro,can't wait to see it finished.
|
|
|
|
Post by hilltopspeedway on Dec 29, 2013 8:03:57 GMT -7
Been slowly chipping away at a Camaro P/S. The front end is getting closer but still needs sharper body lines. Taking a look at the real ones below, I need to lose some height off of the truck lid   quote] I like where this is heading!!! RM |
|
|
|
Post by onefastmustang on Jan 1, 2014 22:03:03 GMT -7
That's a great looking Camaro your working on, can't wait to see the finished product
|
|
|
|
Post by SKR on Feb 9, 2014 12:50:15 GMT -7
Put some work into my Camaro. After looking at the 1/1 pics I decided the hood needed to be more bubble shaped. I decided to cut it on both sides of the cowl with a razor saw and lift it a little. I also worked on dropping the rear deck lid a little, modifying my styrene wing and re contouring of the hood scoop a little. 
Have some minor details to work on. This body is a little too narrow for a inline chassis. It will be set up for 4G action. 
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2014 13:13:49 GMT -7
Looking good Sam. Saw lots of new Cams this weekend on NHRA! Appears as if it has become the racers choice!
For what little it is worth it - on the 1:1 pictures you posted it looks like the bottom of the front side windows are parallel to the rocker panel of the car. Could be just me.
Keep the progress coming!
Alan
|
|
