Blue
Pro Stock
TKS Modelsports
Posts: 207
|
Post by Blue on May 30, 2011 6:38:12 GMT -7
I will be sending 2 NF/C and 2 N/PS all will be Chevys ;D
Thanks Tim
|
|
|
|
Post by ninjatek on May 30, 2011 8:22:12 GMT -7
I will be sending 2 NF/C and 2 N/PS all will be Chevys ;D Thanks Tim You're on the list, Bluegnuoy. Slots #4 and #12 for NF/C, and #21 and #22 for N/PS. Heavy competition brewing in making the Chevy and Independent camps. |
|
|
|
Post by Joe65SkylarkGS on May 30, 2011 13:15:00 GMT -7
Ok ninjatek, leave me the way i am. And don't be surprised by the Tri Shield Power my friend. The car has had an engine overhaul and the body went on a diet!!!
Buick's coming!!!!
Oh....and the mopar too.
|
|
|
|
Post by derwood16 on May 30, 2011 17:40:46 GMT -7
Put me in for 1 NF/C and 2 N/PS ALL MOPAR.
Thanks Darren
Ohio Mafia
(AKA The Hit Man)
|
|
|
|
Post by ninjatek on May 30, 2011 19:16:42 GMT -7
Put me in for 1 NF/C and 2 N/PS ALL MOPAR. Thanks Darren Ohio Mafia (AKA The Hit Man) The Hit Man has surfaced! You are at slot #8 for the Chrysler team and slots #23 and #24 for N/PS. |
|
|
|
Post by TGM2054 on May 31, 2011 14:33:04 GMT -7
WOW! 50 plus cars! Rick,I hope you can set up a minature fireworks show over the track, cause I don't think your going to get out to see a real one.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 4, 2011 14:15:49 GMT -7
Please put me down for 2 Fords in the NF/C class
|
|
|
|
Post by ninjatek on Jun 4, 2011 23:15:47 GMT -7
Please put me down for 2 Fords in the NF/C class You're on the list at slots #2 & #3 for the Ford camp. Welcome to the race! |
|
|
|
Post by ninjatek on Jun 7, 2011 20:03:58 GMT -7
charley
You're on list at #13 in the Chevy camp for NF/C.
Welcome to the race!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2011 21:21:20 GMT -7
What are the wheel apperance rules for this class?
|
|
|
|
Post by bondoman2k on Jun 9, 2011 22:18:06 GMT -7
Slotfather, the only wheel/tire rules that I am aware of are as follows: "Any readily available slip on tires (silicones included), .550 Maximum diameter" So, any wheels and tires that fall within those rules should be allowed.  Right Ninja or Rick?  Ron (Bondo)  |
|
|
|
Post by ninjatek on Jun 10, 2011 6:28:27 GMT -7
What are the wheel apperance rules for this class? Slotfather, the only wheel/tire rules that I am aware of are as follows: "Any readily available slip on tires (silicones included), .550 Maximum diameter" So, any wheels and tires that fall within those rules should be allowed. Right Ninja or Rick? Ron (Bondo) Welcome to Nitroslots, Slotfather! That is correct, Ron. Any combination wheel/tire using readily available parts is allowed. The combination cannot exceed the allowed .550" maximum diameter. Stock rubber or slip-on silicones allowed, silicone coated foam (silly foams) not allowed. The preferred tire color is black, but is not a requirement to qualify. |
|
|
|
Post by bondoman2k on Jun 10, 2011 17:59:42 GMT -7
Ninja, I have a question that I'm pretty sure I know the answer, but am asking it more for other racers/builders purposes than for my own. The rims can be 'trued' correct? I mean like putting an axle in a drill and using an emery board on the wheels themselves where the tires sit. And, the tires can be siliconed to the rims, correct? (by 'silconed' I mean silicone glue) I know that was allowed at the last NFC race, but just wanted to be sure, since both of my cars are built that way.  By the way guys, putting your axle(s) in a drill and spinning it is also a good way to check for a bent axle. ;D Ron (Bondo) |
|
|
|
Post by Joe65SkylarkGS on Jun 10, 2011 20:44:33 GMT -7
Nice little tip bondoman. I like quick fast procedures. Getting close boys. Getting excited??? |
|
|
|
Post by ninjatek on Jun 11, 2011 4:33:35 GMT -7
Ninja, I have a question that I'm pretty sure I know the answer, but am asking it more for other racers/builders purposes than for my own. The rims can be 'trued' correct? I mean like putting an axle in a drill and using an emery board on the wheels themselves where the tires sit. And, the tires can be siliconed to the rims, correct? (by 'silconed' I mean silicone glue) I know that was allowed at the last NFC race, but just wanted to be sure, since both of my cars are built that way. By the way guys, putting your axle(s) in a drill and spinning it is also a good way to check for a bent axle. ;D Ron (Bondo) I agree. I have researched the archives and found it to be a legal procedure for stock class rules. Stock class having the minimum mods allowed, I would conclude that which is legal for stock is legal in all classes. For those unfamiliar with the procedure a more detailed instruction can be found on pages 18-19 of 'Tuning the Pancake Part I'. www.ninjatekprojects.com/PDF/Tuning%20the%20Pancake%20Part%201.pdfOh well, there goes another tech tip for NTRA Quarterly.  |
|
