|
|
Post by Eagle Racing on Dec 19, 2021 7:22:34 GMT -7
57 Chevy paint with Createx Wicked Bismuth Yellow Vanadate. Fancy name for it's Yellow. I used Stynylrez by Badger, Gray Primer. This color primer gives me a deeper color. The car name decal is by Road Race Replicas. The rest of the decals are ones that I made. The clear coat is UVLS gloss. The setup is on one of my M10 chassis. The motor is an M10, 2.4 ohm balanced armature with ceramic magnets. The milled wheel inserts are a new design that I have never put on a car before. They are chromed with Molotow Liquid Chrome. My pen tip quit dispensing chrome. I pulled the tip out and put a with drops on glass. I then brushed the chrome on with a 5/0 brush. I did all the chrome work this way. It stayed nice and shiny even after the clear coat. I will be testing this setup with the 2.4 ohm armature. I need to get my starting line light bar working again and then I will post some times.
  
|
|
|
|
Post by AJR on Dec 19, 2021 17:07:11 GMT -7
Beautiful car! I like the way the chrome looks brushed on better I think. Thanks for posting.
|
|
|
|
Post by ecbill on Dec 20, 2021 5:35:46 GMT -7
Sweet looking 57! Nice decals and good use for malfunctioning chrome pen.
How do you like the performance the M20?
Which classes would this be legal in besides unlimited?
|
|
|
|
Post by Eagle Racing on Dec 20, 2021 7:16:43 GMT -7
Sweet looking 57! Nice decals and good use for malfunctioning chrome pen. How do you like the performance the M20? Which classes would this be legal in besides unlimited? Thank you! M10 motor has a lot of potential. The brushes are .072 diameter vs Wizard .062 diameter brushes. This is around 16% larger brush, more contact. Only brush bigger is the Wizard Big Foot @ .077 The armature is standard size. The motor magnets are Ferrite ceramic magnet. Performance should be pretty good. As I stated in an earlier post when I get my starting line light bar working again I will post some times. Just guessing with right tires, gears and braid on the pickup shoes it should be pretty fast. Which classes would this be legal in besides unlimited? It should be legal in Comp, Super Comp and Unlimited according to NTRA Rules. That would be something you would have to checkout before you enter the the race. The Turbo Motor chassis I build uses the standard Turbo motor like the Tomy Turbo or the Bulldog chassis. It should be legal according to NTRA Rules, but still have to check to see if it is okay to race. |
|
|
|
Post by Eagle Racing on Jan 9, 2022 7:48:04 GMT -7
|
|
|
|
Post by AJR on Jan 9, 2022 12:44:33 GMT -7
Good stuff coming out of the Eagle Racing garage! That narrow chassis looks really nice Robert!
|
|
|
|
Post by gibbo61 on Jan 9, 2022 20:57:28 GMT -7
How do you designate motor # I have a cpl. of the black belled motors that resemble yours. All I really now about them is the seller stated they were 15% faster then a standard mega g+ motor. they were fairly cheap , I think less than 10 bucks each.
I'd like to know little more about them without tearing one down if possible.
|
|
|
|
Post by Eagle Racing on Jan 10, 2022 9:10:38 GMT -7
How do you designate motor # I have a cpl. of the black belled motors that resemble yours. All I really now about them is the seller stated they were 15% faster then a standard mega g+ motor. they were fairly cheap , I think less than 10 bucks each. I'd like to know little more about them without tearing one down if possible. Okay deleted old post because I was talking about the wrong motor, senior moment. The motor designation N20 is short motor and mine are for drag racing. The N30 is a longer motor and is a 6ohm motor. All my motors use carbon brushes not wipers. The Mega G+ can motor is a 14 ohm motor. So a higher ohm motor should be faster. If you set it up right. I hope this helps. A lower ohm motor should be faster. If set up right.  Senior moment, sorry |
|
|
|
Post by Eagle Racing on Jan 13, 2022 16:14:54 GMT -7
Hello everybody hope everyone had a happy new year. I am redesigning the eagleracingusa.com website. If somebody could go to the site and click on the Contact US page. Then send a message to me, just this is a test. I need to verify that it is working. Kind of hard to send a message to yourself. Thank you in advance.
|
|
|
|
|
|
Post by Eagle Racing on Jan 13, 2022 22:19:31 GMT -7
Thanks Comet, for kind words.
|
|
|
|
Post by dave632 on Jan 14, 2022 10:35:10 GMT -7
Site looks good.
|
|
|
|
Post by crazynski on Jan 14, 2022 15:44:09 GMT -7
Looks great!  |
|
|
|
Post by Eagle Racing on Jan 15, 2022 12:53:00 GMT -7
Alright got the Contact Us page on my site fixed. It was tossing the messages in the Spam folder. Thanks to everyone that helped.
|
|
|
|
Post by Eagle Racing on Jan 17, 2022 6:38:52 GMT -7
Here is a new project I am starting. This will be built around the new Eagle Racing narrow chassis I just finished.
|
|
Senior moment, sorry
