kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Feb 2, 2012 14:49:29 GMT -7
pceng,
Thank you as always
|
|
kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Feb 4, 2012 10:23:36 GMT -7
Hello all,
I just got a new resin body and it has some pits in it. I'm new at this, what is the best way to fill these pits before primer and pait?
kbuck
|
|
|
|
Post by kdog on Feb 4, 2012 13:12:39 GMT -7
Guys with resin mix a bit extra and use that, but if you don't cast, use some plane model puty, or mix a small amount of 5 min. epoxy. The Dogs favorite method is to put a dab of Gap Filling Super Glue in the hole with a toothpick than a spirtz of Hardener, (The Dog don't like to wait) than just sand smooth.
Dog
|
|
|
|
Post by TGM2054 on Feb 4, 2012 16:51:40 GMT -7
I like to use Squadron's Green Putty. Sands real smooth and easy, much better than their White Putty.
|
|
|
|
Post by onefastmustang on Feb 4, 2012 18:00:18 GMT -7
Hey Camaroguy those are some sweet wheelie bars
|
|
|
|
Post by pceng on Feb 5, 2012 8:58:00 GMT -7
Kbuck, if any auto parts stores are near spot puty will work. Have a tube of Bondo been using for a long time. Think it was 2 or 3$.
.......PC
|
|
kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Feb 5, 2012 9:56:15 GMT -7
Thanks again Bud.
|
|
kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Apr 3, 2012 6:54:09 GMT -7
I've got a question about the controllers that are used at races. Are they varible speed or an instant full power on button? And what do most prefer?
Just wondering.
KABOOM
|
|
|
|
Post by pceng on Apr 3, 2012 7:58:16 GMT -7
Kbuck, think the controllers are up to host track. Could be what they have, or prefer to get. Sure that same ohm rating is a requirement. Can't say I have a preference, between the two I've only had variable speed controls.
........PC
|
|
kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Apr 3, 2012 8:42:42 GMT -7
 I guess it will depend on who the drivers are for the race and who has the most consistent low RT, Wood or Blue. OK boys, Who has the lowest consistent RT of yo two? Kbuck
|
|
|
|
Post by Bananasmoothie1975 on Apr 4, 2012 5:37:40 GMT -7
re filling bits, if I use epoxy I usually add a small amount of talc powder, makes for better sanding.
|
|
kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Apr 7, 2012 18:49:31 GMT -7
Just wanted to wish everyone a happy EASTER.
kbuck
KAboom
|
|
|
|
Post by pceng on Apr 8, 2012 7:36:23 GMT -7
This one snuck-up on me. Didn't realize till last night. Happy Easter, to all. I'm rooting for any of you that might be hunting eggs today. Just go easy on the little ones.
..........PC
|
|
kbuck
Pro Stock
"THUNDER BUCK RACEWAY"
Posts: 437
|
Post by kbuck on Apr 15, 2012 14:14:19 GMT -7
Just thought I would stick this in here. I was just watching the NHRA 4 WIDE NATIONALS, and I have come to the conclusion, that I don't care for it. Can't seem to concentrate on watching four cars at once. Any thoughts?
Race On!
|
|
|
|
Post by Bananasmoothie1975 on Apr 15, 2012 20:03:35 GMT -7
They race 4 cars now?  !! |
|
!!