wood
Pro Stock
Posts: 237
|
Post by wood on Apr 14, 2012 7:35:02 GMT -7
Hey guys, Blue's still at work so we're in a holding patten for a little while
.
Thanks for your patience.
Bluewood racing
|
|
|
|
Post by ninjatek on Apr 15, 2012 6:58:27 GMT -7
Hey Wood, by the last event I ment the last time we ran stock. Would have been last year. And I'm not sure how to look that up, let alone post the pics. But I did look up the rules on stock last night and for axels it says any permitted. ........................PC pceng The last event featuring Tjet Stock Class was 2011 NTRA Finals. nitroslots.com/index.cgi?board=liods&action=display&thread=2557The car with the extended axle you are referring to was run in Ratt Rod Class. Also there is a portion of the rules for Stock Classes which calls for a limitation as to how far the axle may extend, at least for the front axle. See below: Tires/ Wheels: Tires shall be made of rubber, silicone, or a popular blend, readily available from normal retail outlets and must comply with individual class rules for this group. Front and rear tire/wheel set may be of differing dimensions. Lo-profile tires are Permitted, but tires must be of sufficient diameter so as to contact track when car is in a normal on–track attitude. (Local ground rules may allow the near-touching of front tires.) Tires may be bonded to the wheels. Front wheels and tires may not extend in width beyond the fender lip, as measured vertically from the 12 o'clock position on the wheel opening arc. |
|
|
|
Post by pceng on Apr 15, 2012 7:37:07 GMT -7
Thanks Cordell, from what you posted and rereading rules, should be ok. All wheels are within fender arcs. Not an extended axel, just the wider one used for truck or hot rod wheels.
.......Peter
|
|
