|
|
Post by sjracer on Jan 25, 2014 17:43:45 GMT -7
Can anybody tell me the proper way to maintenance a TKO track. I know it's suppose to be sintra but TKO tracks are extremely soft and I don't want to mess anything up.[/font[/font]]
|
|
|
|
Post by nosubfor3 on Jan 26, 2014 6:10:31 GMT -7
Can anybody tell me the proper way to maintenance a TKO track. I know it's suppose to be sintra but TKO tracks are extremely soft and I don't want to mess anything up.[/font [/font]][/quote] I have a MAXX TRAXX drag strip which I think is similar material as TKO. I have been using 409 cleaner for years without any issues. Spray the 409 on a clean paper towel and wipe the surface at the same time followed with a clean dry paper towel. Do not leave the track surface wet. I think Lions dragway is a TKO. Contact Rick who owns Lions to ask. |
|
|
|
Post by sjracer on Jan 26, 2014 13:34:21 GMT -7
Thanks for the reply but I've been told not to use 409 or any other water base cleaner. I was hoping Rick would see the post and chime in. I 've gotten a few other replies via pm but have been told that the track surface starts to look like a dart board with the one.
|
|
|
|
Post by nosubfor3 on Jan 26, 2014 17:11:53 GMT -7
Thanks for the reply but I've been told not to use 409 or any other water base cleaner. I was hoping Rick would see the post and chime in. I 've gotten a few other replies via pm but have been told that the track surface starts to look like a dart board with the one. Send him a PM. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2014 19:48:52 GMT -7
My track was custom made for me by TKO. It is gray in color. I was told directly by the builder to use 409 and a soft rag. The track has been in use now for almost 3 years. No issues what so ever with it. The material used is a bit soft but with care and a hair dryer on low heat and a distance away you can remove dents! So far I have not had the need to do it !
Al @ Maple Groove Drag Strip
|
|
