|
|
Post by Escamilla Chicks on Feb 12, 2015 5:13:02 GMT -7
one stock and one Pro Street thank you
|
|
|
|
Post by Eagle Racing on Feb 12, 2015 7:15:15 GMT -7
Oh great one please two N/TF and one PS/MC
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2015 9:59:04 GMT -7
What is the PS/MC class?
Thanks
ALan
|
|
|
|
Post by AJR on Feb 12, 2015 13:26:16 GMT -7
Pro Stock Motorcycle Al. It was supposed to be more of an exhibition, but there are now several bikes out there. I will run normal type eliminations with them.
|
|
|
|
Post by pceng on Feb 12, 2015 14:55:22 GMT -7
Please add another stock entry .......... tia !
|
|
|
|
Post by nosubfor3 on Feb 12, 2015 15:03:05 GMT -7
Just another question on stock T-jet. Since we are allowed to us both Dash 16 ohm arms and magnets, is it allowable to just use the whole Dash gear plate in a T-jet chassis?
|
|
|
|
Post by Phantom B.S.E. on Feb 12, 2015 15:17:34 GMT -7
The rules state top plate must be the same as the base.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2015 16:31:01 GMT -7
Does this mean that you must use a Tjet bottom and top or a Dash bottom and top or does it mean that has long as it has a TJET design then you can use a Tjet bottom and a Dash top or a Dash bottom and a Tjet top? Darn how do you fit AW and JL into that mess!!!!!
ALan
|
|
|
|
Post by TGM2054 on Feb 12, 2015 17:03:21 GMT -7
From what I read the top plate and chassis have to be from the same manufacturer. You can use Dash parts in an old Model Motoring chassis though.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2015 17:38:57 GMT -7
You are correct! Went back and reread the rules and the very last sentence says it all!!
Thank you
Alan
|
|
|
|
Post by ninjatek on Feb 12, 2015 17:55:13 GMT -7
one stock and one Pro Street thank you You are on the list at #12 for Stock and Pro Street classes. Oh great one please two N/TF and one PS/MC You are on the list at #7 & #8 for NTF and #7 for PS/MC. Welcome to the race! Please add another stock entry .......... tia ! Additional entry added at #13 for Stock class. |
|
|
|
Post by AJR on Feb 12, 2015 19:56:06 GMT -7
Cordell (2) in N/TF and (1) in PS/MC please. Thanks.
|
|
|
|
Post by pceng on Feb 12, 2015 19:56:20 GMT -7
You are correct! Went back and reread the rules and the very last sentence says it all!! Thank you Alan Rules may allow for Dash chassis. Under chassis it says t-jet styled copper clad. Aurora & Dash are the only I know of. Looks like parts can be mixed except chassis parts ? ........ Peter |
|
|
|
Post by ninjatek on Feb 12, 2015 20:42:59 GMT -7
Rules may allow for Dash chassis. Under chassis it says t-jet styled copper clad. Aurora & Dash are the only I know of. Looks like parts can be mixed except chassis parts ? ........ Peter You got it! Chassis top plate and bottom must remain together. (Need not be purchased together but of same manufacturer.) All other parts are interchangeable, except Dash 3-lam armature not permitted. Brushes, pick-ups, springs, motor magnets, gears, body, wheels, and tires, your choice so long as all other rules requirements are met. Mainly that of being stock components. Similar to gutting a AMX and outfitting with Chevy drive-train. (Nothing against AMX.  ) |
|
|
|
Post by ninjatek on Feb 12, 2015 20:49:22 GMT -7
Cordell (2) in N/TF and (1) in PS/MC please. Thanks. You are on the list at #9 & #10 for NTF and #3 for PS/MC. Thanks for hosting the event! |
|
)