|
|
Post by Gymi on Nov 19, 2016 15:32:36 GMT -7
Rob at Superjet Slot cars has just come out with a line of drag slicks for AW 4-gear chassis. He sent me a pair of each type he is producing. They are pretty sticky like Jel-Claws, but come in the same size as the Auto World dragster tires. He has them in three flavors, Hoosier, white and yellow lettered Goodyears. They are $3.75 per pair, a bit more than Jag hobbies was selling the Auto World dragster tires for. In my opinion, they are worth it and look and work great.
 IMG_5641 by vintagedirtbikes, on Flickr
 IMG_5640 by vintagedirtbikes, on Flickr
 IMG_5639 by vintagedirtbikes, on Flickr
|
|
|
|
Post by kiwidave on Nov 19, 2016 16:14:43 GMT -7
Excellent!! I'll be ordering some of these for sure. Thanks for posting!
|
|
|
|
Post by ecbill on Nov 19, 2016 17:34:54 GMT -7
Nice looking tires on a very nice looking car!
|
|
|
|
Post by Gymi on Nov 19, 2016 20:17:09 GMT -7
You guys will definitely like these tires.
|
|
|
|
Post by AJR on Nov 20, 2016 6:09:45 GMT -7
Good to know and thanks again for sharing. There are not enough large diameter tires out there for the 4 gear rims. I will be making an order.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2016 17:56:20 GMT -7
I ordered some of each of those tires.
also four aluminum 1/48 hubs for 3/32 axles.
be aware that 4 gear wheels fit the axles for original Aurora O-gauge(1/48) axles and these tires will really look good on those cars.
on another positive note, a friend who went to the Parsippany show today reports there were a bunch of new vendors and a lot of NOS Aurora stuff at very reasonable prices.
so we might be witnessing a resurgence of our hobby!
|
|
|
|
Post by ecbill on Nov 20, 2016 19:52:18 GMT -7
Parsippany, is that in NJ? It's encouraging that new products are being released.
|
|
|
|
Post by Gymi on Nov 20, 2016 19:53:55 GMT -7
You will love the tires, thanks for the O gauge tip and that is definitely good news about the Parsippany show.
|
|
|
|
Post by nosubfor3 on Nov 22, 2016 11:24:03 GMT -7
What is the mounted tire size? Will they fit any size rim? ID? OD?
|
|
|
|
Post by Gymi on Dec 23, 2016 11:37:53 GMT -7
What is the mounted tire size? Will they fit any size rim? ID? OD? Sorry it took so long to get back to you, I just came across the question. Not sure on the ID or OD, didn't measure them. He makes them for the 4-Gear wheels and I believe they are the same size that comes on the Auto World dragsters. |
|
|
|
Post by Eagle Racing on Dec 23, 2016 14:20:25 GMT -7
Racers these tires are made of Urethane rubber. They will true and can be reduced in diameter simply by sanding. Now it takes awhile to sand them but hey it will work. The 1/32nd racers have been doing it for years.
|
|
|
|
Post by nosubfor3 on Dec 25, 2016 2:30:45 GMT -7
Racers these tires are made of Urethane rubber. They will true and can be reduced in diameter simply by sanding. Now it takes awhile to sand them but hey it will work. The 1/32nd racers have been doing it for years. What grit sand paper would you use? |
|
|
|
Post by Eagle Racing on Dec 26, 2016 7:35:01 GMT -7
I watched a video of 1/32nd tire razor (it is a sanding tool) they used 1500 grit. This gives a real smooth surface. I am going to start out with much coarser paper first say 600 and work into 1500. Just have to experiment for best and fastest way to get job done. They also used 10 volts of power to wheels to sand with.
|
|
