|
Post by nosubfor3 on Dec 19, 2017 14:50:05 GMT -7
I'm calling out JJ for the #1 spot in 4 gear outlaw.
|
|
|
Post by dave632 on Jan 15, 2018 14:48:55 GMT -7
Bill has challenged me for the #3 spot. I would like to challenge who ever is above me after that race.
|
|
|
Post by jjwallace on Jan 15, 2018 18:37:52 GMT -7
I have documented the call outs to this point. They will be posted on the Sign Up page. Dave you will get your call out for what would be the #2 spot if you defend against Ecbill. If you lose your call out will be in Round 2.
|
|
|
Post by Eagle Racing on Jan 24, 2018 21:49:43 GMT -7
I will call out Hilltop for #7 spot.
|
|
|
Post by jjwallace on Jan 25, 2018 3:59:05 GMT -7
I will call out Hilltop for #7 spot. Robert your Call Out has been noted.
|
|
|
Post by gnome on Feb 10, 2018 11:02:43 GMT -7
Started digging in my 4 gear stuff and stoped. Cant seem to find rules other then pancake /comp most everything on that list of rules says no restrictions .the list dave 632 gave me for pso set me straight for that car any help for the 4 gear would be appreciated
|
|
|
Post by dave632 on Feb 10, 2018 12:27:07 GMT -7
Only difference between PSO and 4GO I can think of is the minimum weight of 25 grams, no tire restrictions, and these cars run at a higher voltage, 20 volts. Everything else is the same as the PSO rules.
|
|
|
Post by jjwallace on Feb 10, 2018 18:39:54 GMT -7
Started digging in my 4 gear stuff and stoped. Cant seem to find rules other then pancake /comp most everything on that list of rules says no restrictions .the list dave 632 gave me for pso set me straight for that car any help for the 4 gear would be appreciated Gnome what Dave said is accurate. Braids are a must and shunts if you can, good brushes Wizz E81 or Slottech although I have had good luck at times with stock brushes. They are inconsistent though. I use slip on silicone or urethane in various sizes. Some on an AFX rim and sometimes stretched over a 4 gear rim. Depends on what I am needing. Most use either stock 18t crown or the earlier 15t version, but there is not much mesh with that one. Mean green arm and the rest is tuning. Sometimes the armature hole on the 4 gear chassis has to be opened up some to accept the mean green. That's the basic set up. If you have any more questions just ask. I put you in the Bracket Race at #29. Hope that is what you were wanting. But I haven't added you to either Shark Pool yet. Let me know what you want to do. Thanks.
|
|
|
Post by jjwallace on Feb 10, 2018 19:48:02 GMT -7
Started digging in my 4 gear stuff and stoped. Cant seem to find rules other then pancake /comp most everything on that list of rules says no restrictions .the list dave 632 gave me for pso set me straight for that car any help for the 4 gear would be appreciated Gnome what Dave said is accurate. Braids are a must and shunts if you can, good brushes Wizz E81 or Slottech although I have had good luck at times with stock brushes. They are inconsistent though. I use slip on silicone or urethane in various sizes. Some on an AFX rim and sometimes stretched over a 4 gear rim. Depends on what I am needing. Most use either stock 18t crown or the earlier 15t version, but there is not much mesh with that one. Mean green arm and the rest is tuning. Sometimes the armature hole on the 4 gear chassis has to be opened up some to accept the mean green. That's the basic set up. If you have any more questions just ask. I put you in the Bracket Race at #29. Hope that is what you were wanting. But I haven't added you to either Shark Pool yet. Let me know what you want to do. Thanks. Gnome I just saw your PM. I will add you to both Shark Pools in anticipation of your 4 gear build . Whatever you build will make the list 4GO list I'm almost positive. You are the only Shark Pool and there will be no shows. But you will have to race for it on the PSO list. So you can get your feet wet on this one and go from there.
|
|
|
Post by gnome on Feb 10, 2018 20:06:37 GMT -7
Perfect. Thank you very much. What kind of times are the 4go cars turning in the 1/8
|
|
|
Post by dave632 on Feb 11, 2018 8:10:30 GMT -7
Here are a couple of cars from the last 4GO list race. This was a 1000' race but you can also see the 1/8th mile times. This class runs at 20 volts not 18 like the PSO cars. Notice the .0001 win by KiwiDave, talk about close. Hairy canary vs KiwiDave, times
Kiwi Vs Hilltop, times
|
|
|
Post by ecbill on Feb 24, 2018 21:44:21 GMT -7
Blue Streak calls out Purple Haze in round 2.
|
|
|
Post by hairycanary on Mar 26, 2018 21:28:38 GMT -7
I have a couple 4G Outlaw and PSO questions. Are motor brush cups legal in 4GO ? And are they legal in PSO ? Is a Super II chassis legal in PSO ? And I just did the EagleInline Quick Removable Rear Axle trick to a 4G and it is Really Bitchen😜 Thanks Robert for that tutorial. That removable axle mod to the chassis is that legal in 4GO ? I thought I seen where it was ?
Thanks Rick
|
|
|
Post by dave632 on Mar 27, 2018 14:14:10 GMT -7
The rules for PSO and 4GO are the same as our comp rules where it says no restrictions on electrical. However I think we might want to add no wet brush but that is open for discussion. As far as I am concerned the Super II and brush cups would be legal. Also NO restrictions on chassis modifications in Super Stock, Comp and Unlimited.
|
|
|
Post by jjwallace on Mar 27, 2018 16:11:26 GMT -7
I think the PSO and 4GO should remain stock type brush setup. I don't agree with the brush cups. Also I believe the Comp rules already say no restrictions on chassis.
|
|