|
|
Post by kiwidave on Sept 26, 2017 0:21:16 GMT -7
|
|
|
|
Post by kiwidave on Sept 26, 2017 0:31:11 GMT -7
Only Thunderjet chassis. Aurora or Auto World allowed.
Traction magnets are allowed. If adjustments are required for your cars between rounds these will be done as requested.
First race is 28th oct so only a week or so for tuning before your cars need to be shipped. Jeff Wallace has offered to
be the US postal hub once again. Thank you.
We would like to get 8 racers from the US to get a 16 car field. Already signed up via PM,
JJWallace
Dave632
ecbill
Nosubfor3
|
|
|
|
Post by Eagle Racing on Sept 26, 2017 5:08:24 GMT -7
I'm down for that race.
|
|
|
|
Post by AJR on Sept 26, 2017 8:34:35 GMT -7
Only Thunderjet chassis. Aurora or Auto World allowed. Traction magnets are allowed. If adjustments are required for your cars between rounds these will be done as requested. First race is 28th oct so only a week or so for tuning before your cars need to be shipped. Jeff Wallace has offered to be the US postal hub once again. Thank you. We would like to get 8 racers from the US to get a 16 car field. Already signed up via PM, JJWallace Dave632 ecbill Nosubfor3 It has been my experience that we need a FULL two weeks to safely get the cars to NZ. So that would put the mail date at no later than Friday October 13 to make sure they get there by Oct. 28th. So I will need everybody's cars by Thursday October 12. That will allow me to pack everything that night and mail the next day. Of course I will mail early if I receive cars early. Here is my mailing address. Jeff Wallace 410 Harrington Lane Euless, Tx. 76039 |
|
|
|
Post by ecbill on Sept 27, 2017 14:47:51 GMT -7
Guessing that braids are taboo but want to make sure.
Bill
|
|
|
|
Post by AJR on Sept 27, 2017 16:05:15 GMT -7
Guessing that braids are taboo but want to make sure. Bill Hey Bill.....FYI.....Kiwidave answered that question in the PM he sent out. First post after Dave632's initial questions. No braids or shunts. All stock parts.  |
|
|
|
Post by Eagle Racing on Sept 28, 2017 5:40:04 GMT -7
Sorry missed that PM invitational part. Did not mean to invite myself. My gasser is the old style NTRA gasser, so I don't have one for the race. Enjoy and have fun.
|
|
|
|
Post by kiwidave on Sept 28, 2017 12:29:53 GMT -7
Eagle you are more than welcome to compete. Throw a stock arm in that Gasser chassis! Anyone else joining in?
|
|
|
|
Post by nosubfor3 on Sept 28, 2017 15:46:42 GMT -7
Sorry missed that PM invitational part. Did not mean to invite myself. My gasser is the old style NTRA gasser, so I don't have one for the race. Enjoy and have fun. Robert you must have a stock AW chassis around some where. Stick some AFX rims on the back and join in the fun. |
|
|
|
Post by nosubfor3 on Sept 28, 2017 15:49:17 GMT -7
Just a note here people. Most of us have a N/P stock we have raced. That set up fits the build of KIWI's challenge. Just take of the braids and shunts if you have them on and Ba-Zinga 14 ohm gasser.
|
|
|
|
Post by nosubfor3 on Sept 30, 2017 16:21:57 GMT -7
Ok. I spent the afternoon at the track testing the 4 type chassis. All 4 are set up the same and ran three times in the same lane.
AW 1.451,1.429,1.426...
Johnny Lightning 1.377,1.341,1.367...
T-Jet 1.275,1.320,1.330...
T-Dash 1.482,1.498,1.503.
This is with out any tuning on the chassis.
On a side note the Dash is very tight out of the box.
Here is a ling to a video about the T-Dash.
|
|
|
|
Post by ecbill on Sept 30, 2017 21:32:05 GMT -7
Interesting results.
Surprised that the JL did so well.
Curious to see how they each respond to some tuning.
Do all of yours have traction magnets?
|
|
|
|
Post by AJR on Oct 1, 2017 2:41:48 GMT -7
What voltage are you testing at Vince?
|
|
|
|
Post by nosubfor3 on Oct 1, 2017 5:06:47 GMT -7
All have one traction magnet, 14 tooth pinion,tuff one sized tires,14+ ohm arm tested at 18 volts.
|
|
|
|
Post by Eagle Racing on Oct 3, 2017 11:24:13 GMT -7
My gasser is heading your way today Jeff.
|
|
