|
|
Post by Eagle Racing on Mar 1, 2018 12:32:42 GMT -7
I would like to propose that the 4G chassis for 4gear Outlaw and 4G Pro Mod/Door Slammer allow the chassis to be modified to accept snap in axle tire gear setups. This would allow anyone to be able to have several tire, gear axle setups to quick change like we can with the inline chassis. This makes changing the 4G setup so much easier. It also allows the racer to view the gears. There is no performance advantage other changing the gear and wheels which we already do. It just makes it easier to do. If this is something that sounds good then I will do a step by step how to DIY.  |
|
|
|
Post by ncdragracer on Mar 1, 2018 19:31:07 GMT -7
Even though I am a Newbie/ Rookie I will second that
|
|
|
|
Post by kiwidave on Mar 2, 2018 3:41:29 GMT -7
Yes please to a DIY.
|
|
|
|
Post by GTS on Mar 2, 2018 5:31:34 GMT -7
As a newb, I also would enjoy the rule acceptance and especially a diy.
|
|
|
|
Post by SKR on Mar 2, 2018 6:33:35 GMT -7
Comp classes were never intended to have restrictions for altering the chassis. I noticed in the rules that there is nothing that covers rules for the chassis. From the beggining we've allowed cutting on Gasser chassis which is a comp class for T-jet. Personally I've always felt as long as the motor brushes and motor magnets stay in the same location as the chassis was produced then any other chassis mods should be legal in comp class.
|
|
|
|
Post by steve on Mar 2, 2018 7:32:23 GMT -7
Even though I am a Newbie/ Rookie I will second that I would like to see how its done also |
|
|
|
Post by AJR on Mar 2, 2018 10:54:32 GMT -7
Even though I am a Newbie/ Rookie I will second that I would like to see how its done also Welcome to Nitroslots Steve! I have no problem seeing it added. Very cool innovation. |
|
|
|
Post by dave632 on Mar 2, 2018 13:02:17 GMT -7
Ease of maintenance is a + in my book. To bad modern car manufacturers do not see that as a +.
I would also say add it as an option to T jet and AFX chassis.
|
|
|
|
Post by bondoman2k on Aug 11, 2018 19:50:22 GMT -7
Did we ever get a how to on this? Did I possibly miss it?
|
|
|
|
Post by AJR on Aug 12, 2018 3:01:35 GMT -7
|
|
|
|
Post by bondoman2k on Aug 12, 2018 6:47:50 GMT -7
Thanks Jeff.  |
|
