|
|
Post by mazda on Mar 12, 2019 3:48:24 GMT -7
My cars have just gone into the mail. Good luck to everybody taking part.
Clive
|
|
|
|
Post by dave632 on Mar 12, 2019 5:02:05 GMT -7
Glad to see you making the trip across the Atlantic again Clive, good luck at the race.
|
|
|
|
Post by dave632 on Mar 12, 2019 7:06:25 GMT -7
I agree, I doubt the traction magnet will help any running a stocker at 14v. In testing earlier today at 14v, many of my faster Dash cars could not stay in the slot when they had descent tires. Had to add traction magnets. Traction magnets definitely made a difference when I pulled them off one of the cars I was testing. Lost about .03 - .05 in ET with no change in MPH so I was wrong. |
|
|
|
Post by GTS on Mar 13, 2019 14:35:43 GMT -7
Will be shipping these to the Winter Nats next week, probably Tuesday or Wednesday. Not much more I can do except keep makin' 'em slower  . I do yet need to add some more weight to the red Willys and the KC Cuda just to make them legal, it's those blue chunks of poster putty next to them in one of the pics. I thought it was odd that the KC car needed weight since it was stock but required a gram. The Willys needed 1.5 grams  . I'm glad I checked them. Whole lot easier to add weight on this end rather then having the Race Master fool with it  . The Nova, a cherished gift from NZ, is Tjet Stock, Henry J & Willys are Tjet Gasser, damn Yankee Cuda is for the KC and the Chevy Waggin' goes in the Shark Pool for the 4GO.
|
|
|
|
Post by dave632 on Mar 13, 2019 16:10:54 GMT -7
None of my cars needed any added weight except for traction purposes.
|
|
|
|
Post by AJR on Mar 14, 2019 2:53:39 GMT -7
I'm not going to mess with the cars unless they are way off the minimum weight.....fyi.
|
|
|
|
Post by dave632 on Mar 14, 2019 9:59:21 GMT -7
|
|
|
|
Post by Eagle Racing on Mar 15, 2019 6:04:49 GMT -7
Jeff sign me up one car in each class. In the 4G Outlaw I challenge Hilltop at #9.
|
|
|
|
Post by AJR on Mar 15, 2019 7:01:59 GMT -7
Jeff sign me up one car in each class. In the 4G Outlaw I challenge Hilltop at #9. Good deal Cuzzo! You are in at #16 on both lists. That will level out the ladders and eliminate any byes....if all the cars make it to the show. Welcome to the race! You are also the first Call Out! I will create a Call Out List for PSO and 4GO. |
|
|
|
Post by AJR on Mar 15, 2019 8:07:54 GMT -7
**ATTENTION** **ATTENTION** **ATTENTION**
**Pro Street and Four Gear Outlaw Update**
PSO and 4GO Call Out Lists have been added to the Page 1 posts on this Sign Up thread. Look there for updates.
I want to remind everyone that ALL CARS WILL RACE UP. I do not need to get a call out from anyone to have their car race up. BUT........I will still accept call outs and those will race first! SO........it still benefits the racer to put in a call out. All other cars will race up in the order they are on the list. If a racer is called out before they race their call out and loses, they will forfeit their call out. Example: CO race 3 is JJW calls out Dave632 for #1 spot. But Gnome has called out JJW for #2 spot in CO race 2. If JJW loses race 2 against Gnome, then he forfeits his call out on Dave632 for race 3. Might sound a little complicated, but it really is not. Bottom line.......you have to win to race up. If you lose, you go back to the trailer till the next round. We do have some cars listed to be in the 4GO Shark Pool. I will run all List Call Outs before the Shark Pool winner gets a shot at the List.
LESS THAN 2 WEEKS TILL RACEDAY!! |
|
|
|
Post by dave632 on Mar 15, 2019 17:10:22 GMT -7
The Rebel has been on top of the Street Outlaw list for quite a while now. I am going to shake up the list by putting in a different chassis. It aint no pushover but it is not as quick as the original. Lets see what happens......  The Rebel by Dave Vince, on Flickr |
|
|
|
Post by ecbill on Mar 15, 2019 18:39:55 GMT -7
Calling out Nosub twice.
For 4th in PSO
For 6th in 4GO
|
|
|
|
Post by AJR on Mar 15, 2019 18:48:22 GMT -7
Starting line is now finished. Only a few small details and signage is left before the race. I just completed new start line barrier walls and track logo. Old ones were made out of foam board and were starting to get beat up. These are made out of wood and utilize the groove that is in the start line track piece. Next will be a technical once over to address cleaning, power rails, and all electrical connections. Need to make sure both lanes are running even.
|
|
|
|
Post by AJR on Mar 15, 2019 19:03:00 GMT -7
Calling out Nosub twice. For 4th in PSO For 6th in 4GO Got them both Bill. |
|
|
|
Post by dave632 on Mar 15, 2019 19:15:21 GMT -7
Starting line is now finished. Only a few small details and signage is left before the race. I just completed new start line barrier walls and track logo. Old ones were made out of foam board and were starting to get beat up. These are made out of wood and utilize the groove that is in the start line track piece. Next will be a technical once over to address cleaning, power rails, and all electrical connections. Need to make sure both lanes are running even.
Looks good Jeff, I am inspired to move forward with my changes soon. I like the starter protection barrier which almost all tracks have to protect the crew. Saw way to many poor drivers get out of shape coming out of the water box. I will be including one of those. |
|
. I'm glad I checked them. Whole lot easier to add weight on this end rather then having the Race Master fool with it 
.
