Blue
Pro Stock
TKS Modelsports
Posts: 207
|
Post by Blue on Apr 28, 2019 13:29:33 GMT -7
Is this still being done or is it shut down. Its been a long time since I have been on the board.Looking to get into more drag racing.
|
|
|
|
Post by AJR on Apr 28, 2019 15:16:04 GMT -7
Is this still being done or is it shut down. Its been a long time since I have been on the board.Looking to get into more drag racing. Yes Blue. The current list standings are on the Home page. We have two Lists....Pro Street Outlaw which is AFX nonMT, MT, and AW pancake. Four Gear Outlaw which is AFX Specialty chassis, MT, and AW four gear. All built to pancake Comp rules nitroslots.com/page/ntra-rulesLook forward to seeing you back in the mix. |
|
Blue
Pro Stock
TKS Modelsports
Posts: 207
|
Post by Blue on Apr 28, 2019 16:14:34 GMT -7
Thanks for the quick reply and when is the next run? I need to start building.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 28, 2019 16:46:01 GMT -7
I think the May 10 race is including the outlaw classes. so maybe that is a little soon for you to get back in. you are invited to try though. most of the scheduled class races are also running the outlaws these days, so check the schedule.
|
|
|
|
Post by AJR on Apr 28, 2019 18:17:51 GMT -7
Thanks for the quick reply and when is the next run? I need to start building. As Al said, the next Outlaw gathering is May 10-12 at Smoky Mountain Dragway. A very nice venue to run fast at. There are still a few days left before time to mail. I don't have my cars ready yet either. If not, there will be another one after that before too long. By the way....PSO runs at 18v and 4GO runs at 20v. |
|
Blue
Pro Stock
TKS Modelsports
Posts: 207
|
Post by Blue on Apr 29, 2019 15:54:54 GMT -7
Is there a minimum weight ?
|
|
|
|
Post by AJR on Apr 29, 2019 16:53:28 GMT -7
Is there a minimum weight ? PSO is 23 grams full fender muscle car type body. 4GO is 25 grams Doorslammer/Pro Mod body. |
|
|
|
Post by GTS on Apr 30, 2019 10:43:16 GMT -7
Is there a minimum weight ? PSO is 23 grams full fender muscle car type body. 4GO is 25 grams Doorslammer/Pro Mod body. Jeff, thanks a bunch for this post! I had been shooting for 23 grams on all my cars. Once again, confusion reigned  . Went back and re-read all the weight specs and I had to add some more putty to both my Inline Comp cars but was able to remove previously added from one of the Inline Stocks  . I really need to print these rules out and post them at my work area as the CRS syndrome is taking hold  big time . Thanks again.
|
|
|
|
Post by AJR on Apr 30, 2019 11:51:10 GMT -7
PSO is 23 grams full fender muscle car type body. 4GO is 25 grams Doorslammer/Pro Mod body. Jeff, thanks a bunch for this post! I had been shooting for 23 grams on all my cars. Once again, confusion reigned . Went back and re-read all the weight specs and I had to add some more putty to both my Inline Comp cars but was able to remove previously added from one of the Inline Stocks . I really need to print these rules out and post them at my work area as the CRS syndrome is taking hold big time . Thanks again.
There were actually two question marks in the weight box for that build for some reason. Everything else had a weight?? It should be 23g. I don't really mess with the cars as long as the weight is close. I only add weight when a car is way off. I believe Dave632 is the same. A gram one way or the other typically doesn't make any difference, but 3 or 4 can be. Depends on the car and the build. I have a couple of pigs that fly down the track....go figure. |
|
|
|
Post by dave632 on Apr 30, 2019 13:09:11 GMT -7
I am not that critical on weight when I run my races. Like Jeff said a gram or two makes little difference. I might check the TQ or a car that is running exceptional. In a lot of cases I have had heavy cars run better than light ones especially with non magnet cars. I have noticed with the good traction magnet cars the weight makes more of a difference. Obviously something to do with traction and weight in the right spots etc.
|
|
Blue
Pro Stock
TKS Modelsports
Posts: 207
|
Post by Blue on May 2, 2019 7:21:45 GMT -7
Another question ,how many cars can you enter?
|
|
Blue
Pro Stock
TKS Modelsports
Posts: 207
|
Post by Blue on May 2, 2019 7:21:59 GMT -7
Another question ,how many cars can you enter?
|
|
|
|
Post by dave632 on May 2, 2019 8:40:41 GMT -7
Outlaw street and Doorslammer list races are only allowed one entry each. At my class races I do not put any limit on entries but others only allow 2 per class.
|
|
|
|
Post by AJR on May 2, 2019 15:18:17 GMT -7
Another question ,how many cars can you enter? Typically 2 cars per class at most all the races. Dave's race would be an exception. As he said, the Outlaw Lists are one car per racer. |
|
. Went back and re-read all the weight specs and I had to add some more putty to both my Inline Comp cars but was able to remove previously added from one of the Inline Stocks 
.
big time 
