|
Post by dave632 on Jun 11, 2020 14:36:12 GMT -7
Good car count in all the classes.
|
|
|
Post by pete on Jun 11, 2020 17:12:06 GMT -7
Please put me in for 1 inline.
|
|
|
Post by AJR on Jun 11, 2020 17:41:02 GMT -7
Please put me in for 1 inline. Pete you are on the list in Inline Stock. Welcome to the race.
|
|
|
Post by wbj on Jun 11, 2020 18:03:20 GMT -7
Gale, You are one talented guy. Very nice work!
|
|
|
Post by 79malibu on Jun 11, 2020 23:05:07 GMT -7
Please take one of my three gear cars off the list
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 12, 2020 8:49:45 GMT -7
Mac, if you are removing the car because of lack of a body, I can supply one if you send the chassis.
|
|
|
Post by AJR on Jun 12, 2020 13:06:44 GMT -7
OK I made some passes down Bear Creek with my cars at race voltages. I pulled the cars out of the box...made sure pick ups and braids were set...warmed them up...and made 3 passes with each car. I am posting the average of those 3 runs and the best ET. Keep in mind my cars are currently set up to run 1000' not 660' like Thunder Road. I still need to run my Inlines. I will add them later. Hope this helps.
Tjet Stock @ 14v Willys - Average for 3 passes .9521 - Best ET .9234
3 gear Stock @ 14v Corvette - Average for 3 passes .7504 - Best ET .7384
Camaro - Average for 3 passes .8883 - Best ET .8735
Inline Stock @ 20v Pantera - Average for 3 passes .4857 - Best ET .4744
|
|
|
Post by GTS on Jun 12, 2020 17:25:21 GMT -7
And here are some times I wrote down this afternoon for 1:64 scale 660' at my track .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 12, 2020 18:20:13 GMT -7
Jeff and Gale, thank you for providing more data.
|
|
|
Post by pete on Jun 12, 2020 19:20:46 GMT -7
There is not much track to spool up RPM. Ill be testing using a seven tooth pinion. I expect to see a better 60' and hope I can reach 660 before everyone else.
|
|
|
Post by dynomike on Jun 13, 2020 9:32:07 GMT -7
I have a question concerning motor magnets. Are the viper pro-4 magnets ceramic? These are the same magnets that come stock in the viper bracket buster that Viper & HC sell. Thank You Michael Mercer
|
|
|
Post by pete on Jun 13, 2020 9:50:53 GMT -7
Yes the 4 means they are ceramic grade. All parts listed for that car are legal.
|
|
|
Post by dynomike on Jun 13, 2020 10:06:32 GMT -7
Thank You for the quick response.
|
|
|
Post by GTS on Jun 13, 2020 11:24:06 GMT -7
I have a question concerning motor magnets. Are the viper pro-4 magnets ceramic? These are the same magnets that come stock in the viper bracket buster that Viper & HC sell. Thank You Michael Mercer I think they should probably be legal but they don't appear to be actual ceramic grade and the NTRA rules haven't made an exception as of yet. Here is the description from the HC Slots site.
Hopefully Jeff will make that determination and clarify for you soon.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 13, 2020 11:31:20 GMT -7
I asked this question of Dave632 leading up to his race. and he said they would be legal in the inline stock class. at least that is the way I remember it. so, unless over ruled, I will allow them for my race too.
|
|