|
|
Post by ecbill on Oct 16, 2022 7:52:29 GMT -7
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 16, 2022 8:37:07 GMT -7
Bill, they look real good.
.5 might be a little big to fit on a door?
I know you can't go too small.
.5 will fit Funny Car doors OK.
|
|
|
|
Post by ecbill on Oct 16, 2022 11:36:25 GMT -7
Thanks for the feedback Al. These are just a starting point. Since I wasn’t sure what applications Sam had in mind, I just made a few sizes to try out. We can go up or down in size as needed.
Mostly I just wanted to let Sam know I didn’t forget about him. Now that the Kiwi Challenge is done, more free time is available.
This new silver material is really nice. Good adhesive and very pliable.
|
|
|
|
Post by skillet on Oct 16, 2022 11:48:50 GMT -7
They look perfect Bill. Just in time to. I got a crisis over here I'm just about out of stencils. I'm going to have to get with you in the next couple days and restock my ECBILL stencils.
|
|
|
|
Post by skillet on Oct 18, 2022 9:39:52 GMT -7
This is the body (I'm pretty dam sure anyways) I'll be painting up. I'll most likely do a few of them. I'm going to that race in June with Eric and it says I can run slottech with tyco narrow pan corvette body. Looks like .20 and .30 inch fit well in different places. I might be able to pull the .50 off on the roof. I'll use all the sizes you made Bill. I'm going to tag my pit box with slottech. I was looking... where the ring goes by the felions neck if we connect that it wouldn't hurt my feelings.  |
|
|
|
Post by skillet on Oct 18, 2022 9:42:23 GMT -7
I think I like these ones  |
|
|
|
Post by skillet on Oct 18, 2022 9:43:58 GMT -7
Maybe just the cats head and then just some solid circles may be good to.
|
|
|
|
Post by ecbill on Oct 18, 2022 10:05:42 GMT -7
This is the body (I'm pretty dam sure anyways) I'll be painting up. I'll most likely do a few of them. I'm going to that race in June with Eric and it says I can run slottech with tyco narrow pan corvette body. Looks like .20 and .30 inch fit well in different places. I might be able to pull the .50 off on the roof. I'll use all the sizes you made Bill. I'm going to tag my pit box with slottech. I was looking... where the ring goes by the felions neck if we connect that it wouldn't hurt my feelings. Making .2 and .3 should be no problem. How big would you like for your pit box? Color? I made some nice Angry Jeff logos for Jeff out of red chrome. Tha Vette has a big hood 1" may fit there. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 18, 2022 10:48:20 GMT -7
I like the idea of just the cat's head, no circle!
|
|
|
|
Post by pete on Oct 18, 2022 14:21:47 GMT -7
Sam its all lexan, no hard bodies. You can still use the stencils on lexan.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 18, 2022 16:12:18 GMT -7
I have some lexan bodies. I'll get a list and some pics.
|
|
|
|
Post by skillet on Oct 18, 2022 17:10:07 GMT -7
What U talking bout Willis.  |
|
|
|
Post by pete on Oct 18, 2022 17:50:28 GMT -7
What class are these rules for?
|
|
|
|
Post by pete on Oct 18, 2022 18:42:24 GMT -7
Sam I think these rules are for Gravity something. There are races/class known as Champion and races known as Support. The champion races are held every year. Support races change.
If Im not mistaken (known to have happened) gravity hard body is were this screen shot is from. Its from a long time ago for a class that was not popular. I do not think you will see this class called for a support race.
The Ohio Hopra group should be finalizing what races will be held and schedule before the new year.
|
|
|
|
Post by skillet on Oct 18, 2022 19:29:47 GMT -7
Spec stock. Page 4. I downloaded 2022 rules
|
|
24F02B86-799D-4C8A-A109-1F312A94AC5B by Bill Le, on Flickr
8DC1EDC8-D94D-496A-935E-0F8F51C5672D by Bill Le, on Flickr
