|
|
Post by lasthobbypromise on Jul 3, 2021 12:17:40 GMT -7
Not sure if this is the place to post but looking for 2 items. Hood Scoop and a rear wing. So far no joy in wHOville.   |
|
|
|
Post by dynomike on Jul 3, 2021 12:40:50 GMT -7
Is that a 67 cougar xr7 ?
|
|
|
|
Post by lasthobbypromise on Jul 3, 2021 13:43:49 GMT -7
Is that a 67 cougar xr7 ? I think. This is what I am going for.  |
|
|
|
Post by dynomike on Jul 3, 2021 14:13:39 GMT -7
Pretty Kool! I just checked through my misc parts box and I don't have what you are looking for. You might try www.roadracereplicas.com/They have a lot of old parts and reproductions. |
|
|
|
Post by dynomike on Jul 3, 2021 14:45:52 GMT -7
|
|
|
|
Post by lasthobbypromise on Jul 3, 2021 14:57:29 GMT -7
Added to my watch list! Thank you! Searched ebay but didn't see this. |
|
|
|
Post by ecbill on Jul 3, 2021 21:05:23 GMT -7
|
|
|
|
Post by ecbill on Jul 4, 2021 5:13:18 GMT -7
Is that a 67 cougar xr7 ? It’s a 68 XR7. My 1st car was. A 67 XR7. Years later I had a 68 XR7 that was nearly identical to the 67. Both were dark green with tan leather interior. The most obvious difference between the years is that the 68s had side marker lights while the 67s did not. The Cougar was always one of my favorite TJet bodies. Always thought is was one of the best handling. |
|
|
|
Post by crazynski on Jul 4, 2021 7:38:55 GMT -7
Hello LHP, The T-jet Boss Mustang has what you're looking for. It has close to the same parts as the XR-7 Eliminator.  I bought the white kit from Jag Hobbies for $8.50 and popped the wing off because I want a Mustang without. But the white kit isn't a Boss Mustang. You'll need to find a used and abused scrap Boss Mustang body to get a proper scoop. That would be one way to solve your problem. Ken |
|
|
|
Post by crazynski on Jul 4, 2021 8:39:45 GMT -7
LHP,
If you want the spare white wing in the picture? Send me a PM with your address. Just hope/pray it survives in the mail.
Ken
|
|
|
|
Post by ecbill on Jul 4, 2021 12:01:23 GMT -7
Hello LHP, The T-jet Boss Mustang has what you're looking for. It has close to the same parts as the XR-7 Eliminator. View AttachmentI bought the white kit from Jag Hobbies for $8.50 and popped the wing off because I want a Mustang without. But the white kit isn't a Boss Mustang. You'll need to find a used and abused scrap Boss Mustang body to get a proper scoop. That would be one way to solve your problem. Ken That’s a great suggestion! Is the scoop molded into the hood or can it be removed? If it’s removable the holes in the hood can be filled and the hood painted. Or just add a blower. No sense letting a good Mustang body go to waste. Jag has a Boss body that is a bit pricey. There must be others available elsewhere. jaghobbies.com/images/slotcars/auto_world/tjet/bla_must.jpg |
|
