|
|
Post by mazda on Feb 12, 2024 7:28:25 GMT -7
I am guessing.832, Tyco chassis are not too bad on my track.
|
|
|
|
Post by swiftkart on Feb 12, 2024 8:07:59 GMT -7
There is nothing wrong with running straight foam tires, it's all in the setup, they are just as fast it the car is setup to use them
|
|
|
|
Post by weissach on Feb 12, 2024 12:23:25 GMT -7
I have no track to test on, so will simply make a Porsche inspired guess 0.956
|
|
|
|
Post by AJR on Feb 12, 2024 16:39:30 GMT -7
I'm going to say .9011
|
|
|
|
Post by finistauri on Feb 12, 2024 18:25:43 GMT -7
My guss is .872
Thanks Adam
|
|
|
|
Post by dynomike on Feb 12, 2024 18:34:43 GMT -7
1.24
|
|
|
|
Post by cozwurth on Feb 12, 2024 19:12:18 GMT -7
All y'all is optimistic. I just launched the same car. 1s flat with "NOS" foam tires that have been conditioned. Give it another 0.6 to roast the foam off the line. 1.600 is my guess. Oh Man! Steve done busted out the redneck words! All y'all!  |
|
|
|
Post by pete on Feb 12, 2024 20:30:24 GMT -7
Im guessing 1.055
|
|
|
|
Post by Steve-E-D on Feb 14, 2024 22:12:19 GMT -7
I think it is going to come down to the condition of these foam tires which Adam has given us precious little clue about. Crispy creams or spongey goodness.
Still standing by my guess, but predicting it will still be >1s.
|
|
|
|
Post by pennywize619 on Feb 15, 2024 0:28:14 GMT -7
I think it is going to come down to the condition of these foam tires which Adam has given us precious little clue about. Crispy creams or spongey goodness. Still standing by my guess, but predicting it will still be >1s. Tire condition? Oh thats a secret lol honestly they are the same today as the day they were produced. |
|
|
|
Post by cozwurth on Feb 15, 2024 3:04:04 GMT -7
I have the same Tyco Vette. The tires on mine are crispy crunchy critters. At 20 volts wheel spin could be had at-will. It even spun out in the corner and went down the side straight backwards a few times.
|
|
|
|
Post by dave632 on Feb 15, 2024 9:31:15 GMT -7
The tires on mine are in decent shape and it ran .8s. Don't know why must be survivor specials.
|
|
|
|
Post by swiftkart on Feb 15, 2024 10:10:26 GMT -7
I have a stock Tyco with foams in good shape and stock gearing, runs .69's on 20v in the 1000'
|
|
|
|
Post by AJR on Feb 15, 2024 13:15:13 GMT -7
I have a stock Tyco with foams in good shape and stock gearing, runs .69's on 20v in the 1000'  ........even your old crap is blistering fast Steve! |
|
|
|
Post by swiftkart on Feb 15, 2024 14:27:34 GMT -7
It's a Japanese release that came with X3 traction magnets and some good foams, I was surprised by the performance of it.
|
|
