Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2008 10:16:10 GMT -7
hello all i am open ho drag track 1/24 in fed . class & BRACKET RACE the class will mm/ps and pro mod my race will been class is $3 pay out $100 each class bracket is 4 each pay out $400 i post pic and the address soon everyone is welcome to race 1-99 old
thank you i new to ho drag rules so if gave a link mm/ps and pro mod rlues it will help me
|
|
|
|
Post by SKR on Nov 28, 2008 11:10:15 GMT -7
Sounds like fun!
Here are our MM/PS rules. As far as Pro Mod goes. We haven't raced that class in awhile. We've been talking about changing the P/M rules a bit for next year because of the unavailability and costs of Polymer motor magnets for some of the cars.
ISRA
Mountain Motor Pro Stock
Class will be heads up run on a Pro Tree (.400)
- Inline Chassis. Tyco, Bsrt, Wizzard, Slottech etc.......
- 1980 or newer car make/model hard plastic or Resin bodies. Body must be a full body with a roof. No convertibles. No open wheel cars.
- Bodies must have a hood scoop and front and rear window
- Any armatures that retails for $12 or less when NEW and is available to the general public. No de-winding. Balancing is allowed. Lowest ohm reading we have taken has been a 2.7, cut off minimum will be a 2.6
- Polymer traction magnets are allowed. Traction magnets can be sanded and cut.
- Motor magnets, any ceramic
- Electrical, unlimited no restrictions. Must be readily available.
*Only Armature bushing allowed (Plastic, bronze, brass) No Ball Bearings allowed.
- Any tire and wheels
- Gears, No restrictions, must be readily available
- Chassis can be cut, sanded, stiffen
- Wheelie bars are allowed
- Weight, 19 grams
|
|
