|
|
Post by SKR on Nov 14, 2007 9:34:46 GMT -7
Here is an Oldsmobile. Hot Wheels plastic hood scoop, styrene wing.  Dodge Stratus   |
|
|
|
Post by SKR on Nov 17, 2007 5:49:34 GMT -7
The Oldsmobile is starting to come to life after shooting some white primer and a yellow base coat over it. Here is a shot after the jegs decals and a few clear coats were applied. Still need to add a chute, lexan windows and some trim detail. The body was a Lifelike Nascar that had windows molded into the body. A few of the modifications have been cutting out the windows and as shown above adding the hood scoop and styrene wing. This car will be mounted to a Tyco 440-X2. I took the body mounts out of an old Tyco body that was already thrashed.  |
|
|
|
Post by SKR on Nov 17, 2007 13:59:03 GMT -7
The Dodge was also a lifelike Nascar. Same mods as the Olds.   |
|
|
|
Post by SKR on Nov 20, 2007 7:51:58 GMT -7
|
|
|
|
Post by SKR on Nov 22, 2007 10:02:48 GMT -7
Here is a Tbird. I made the hood scoop out of balsa wood. Easier than I thought it would be. I got the idea from Tim W. His P/S cars have balsa wood hood scoops.   |
|
|
|
Post by SKR on Nov 22, 2007 10:05:34 GMT -7
The 84 Camaro after paint and decals. If your racing the MM/PS series at PSD and need a body, I'll sell this one. It mounts to a narrow 440-X2 chassis.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 22, 2007 22:26:48 GMT -7
Another nice job Sam.
This car always stuck in my head...Lee Shepherd was a great P/S driver and the Reher-Morrison paint scheme, although simple, is immediately identifiable to long time drag racing fans.
|
|
|
|
Post by SKR on Nov 23, 2007 19:41:10 GMT -7
Thanks Chris. Your right, simple paint scheme but effective in identifying.
|
|
|
|
Post by SKR on Nov 25, 2007 21:40:59 GMT -7
Kim's Camaro. Lifelike body with balsa wood hood scoop and styrene wing. This hood scoop I shaped to look more like some of the tri-aero scoops that are out today. This car will get the color change paint and Summit decals like the 69 Camaro I did. I have to take my time with this one because the boss is close by  . Thanks for giving us this body Steve!    |
|
|
|
Post by kdog on Nov 26, 2007 15:04:26 GMT -7
looks good Sam! Man balsa wood scoops I am all over that idea and I though I was a multi media guy GOOD JOB!
Kevin
|
|
|
|
Post by SKR on Nov 26, 2007 18:25:38 GMT -7
Thanks Kevin. Give it a try. I've just been drawing on one side of the balsa wood and then rough cutting it with a hobby knife and smoothing things up with some 400 grit sanding paper. After one side is close then I start on the other side and eyeball the two sides until I like it. It'll take about 45 minutes to an hour of your time you'll never get back ;D.
|
|
|
|
Post by SKR on Nov 26, 2007 18:27:13 GMT -7
This is mine I'll be racing. Anybody want to guess who drove this one?  |
|
|
|
Post by SKR on Nov 28, 2007 10:32:36 GMT -7
Bob Glidden Probe   |
|
nitro
Pro Stock
Posts: 101
|
Post by nitro on Dec 29, 2007 5:51:52 GMT -7
here is my pro stock project and this is the one that i would you Sam to paint up for me. it`s a 05-06 dodge charger resin body w/a tyco 440x2 chassis,custom hood scoop and rear wing made from styrene   also a pic of the vw pro stock that i would like you to paint up onto the lexan body i have or onto a chop top vw lexan body if they are still available  i hope you guys like my project Mario a.k.a nitro |
|
|
|
Post by SKR on Dec 29, 2007 8:34:28 GMT -7
Nice Bug!
Sending you an Email
|
|
.
