|
|
Post by Eagle Racing on Feb 24, 2015 5:10:25 GMT -7
Testing continues today, I built the second setup and still need to fit and paint the FED body to the chassis. No time to wind a motor for myself as I have several to do for others. So the motor of choice for this race is one of the first motors I did when I started winding pancake motors again 5 years ago. It has  advanced timing, wound with size wire with length on each pole. It has been a lot of fun to share this info with the rest of you.....  |
|
|
|
Post by pceng on Feb 24, 2015 7:21:15 GMT -7
Testing continues today, I built the second setup and still need to fit and paint the FED body to the chassis. No time to wind a motor for myself as I have several to do for others. So the motor of choice for this race is one of the first motors I did when I started winding pancake motors again 5 years ago. It has advanced timing, wound with size wire with length on each pole. It has been a lot of fun to share this info with the rest of you..... Lol ............. a regular fountain of information. :-) |
|
|
|
Post by Eagle Racing on Feb 25, 2015 5:47:26 GMT -7
More testing again today. I built a third chassis with AFX specialty parts, but not a good parts match. Not happy with chassis. So, I will build another setup.
|
|
|
|
Post by Eagle Racing on Feb 28, 2015 15:58:01 GMT -7
Finally made time to wind myself a motor for N/TF. I also did a little chassis work to stiffen up the chassis. I love the experimentation in the N/TF class. |
|
|
|
Post by AJR on Mar 4, 2015 6:41:31 GMT -7
Robert have you received the no blow comms for our inline winds yet? Just checking in with you cuzzo.
|
|
|
|
Post by Eagle Racing on Mar 4, 2015 13:57:44 GMT -7
I have twelve comms that have never been turned on a lathe, cuzzo. I have us covered for whatever you want. The stacks are not thin lam but I have some old 33g arms wound on the thicker lam arms and they are just as fast.
|
|
|
|
Post by AJR on Mar 4, 2015 21:51:14 GMT -7
Excellent!! I am doing some research and will have some questions for you before I decide on what I am wanting. Looking forward to these builds and some bad@$$ Screaming Eagle inline winds. Got the last pancake wind I got from you to wake up, but I'm still leaving some on the table. Had race stuff to tend to and ran out of time, but it should run pretty strong. I will have to extend my shutdown area before running any of the unlimited inline winds once this race is done. Think I'm going to put the proxy thing to rest after this race. The fun has just been zapped out of it in recent months. Focus on club racing and getting better on my custom builds. Looking forward to the motors.
|
|
|
|
Post by Eagle Racing on Mar 5, 2015 8:41:39 GMT -7
Cuzzo as I have told others, the big three BSRT, Wizzard, Slot Tech arms are the best IMHO. I can wind you some but don't expect that type of quality. These arms are ok for drag racing but not road racing. I am not setup to produce that type of quality. That being said do your research and let's have some fun with inlines. I know you don't smoke but some of these arms will.... I have just about any wire size you want. However only a couple are ML wire. The rest are not. |
|
lewis
Pro Stock
Posts: 220
|
Post by lewis on Mar 5, 2015 8:50:46 GMT -7
Eagle we were talking about arms the other day. Dan from viper has some really nice blanks for sale. They don't come with come so you would have to pull some off the old Tyco pro can motors by I think you will realm like the stacks on there.
|
|
|
|
Post by Eagle Racing on Mar 9, 2015 5:41:58 GMT -7
Time to get back to work on some of my projects. First up my FED or N/TF, lots of ideas mine and others will be used to build this one. I will post pics later if I remember to...  I am also rebuilding my Door Slammers. It is time to turn up the heat in this class. |
|
|
|
Post by Eagle Racing on Apr 13, 2015 7:37:34 GMT -7
So just a short update on what is happening at the Blacktop. Of course I am getting ready for our annual race the Summer Nationals. I have several new bodies that will be cast this year. Some I have been working on for along time. I do have a couple major projects in the works for ho slot cars. |
|
|
|
Post by AJR on Apr 13, 2015 7:57:32 GMT -7
Looking forward to the project updates. You have told me about some of the things that you have in the works.
|
|
lewis
Pro Stock
Posts: 220
|
Post by lewis on Apr 13, 2015 12:11:48 GMT -7
Did y'all get a chance to check out wild bill's
|
|
|
|
Post by Eagle Racing on Apr 13, 2015 12:22:35 GMT -7
I was there several years ago, Lewis. I do not know if Jeff has stopped by. I was into 1/32nd scale back then. They had a real nice selection.
Jeff I have now been shipped all the raw material to build the project you are referring to. It will not be easy. I have started building the tooling needed to get this project going. Just keep your fingers crossed cuzzo. I will text you with updates.
|
|
|
|
Post by mike11422 on Apr 17, 2015 9:04:11 GMT -7
Probably not even close but is it...carbon fiber?
|
|
advanced timing, wound with 
I am also rebuilding my Door Slammers. It is time to turn up the heat in this class. 