|
|
Post by dave632 on Mar 12, 2018 12:46:44 GMT -7
Nice work will have to try it.
|
|
|
|
Post by Eagle Racing on Mar 13, 2018 5:57:59 GMT -7
Like the adjustable mags and bushings. How are the bushings secured and when will they be available. With snap in axle adjustable mags and bushed rear axle. Think im going to mess with the one I've put on the shelf. Its a custom altered on all world chassis. I've heard it screaming sand fly at night. I made the bushings for a scratch built chassis project I am working on. It is a 1957 Indy Novi Vespa. I think a drop of Super Glue should work. To remove just use a little Super Glue remover and push out. That is my plan anyway....  I will be sharing that build on Slot Car Illustrated Forum under Eagles Projects. When I do a scratch built drag chassis I will share it here. I have used ball bearing bushings before in a 4G Front Engine Dragster (FED). They are also Super Glued in. |
|
|
|
Post by Eagle Racing on Mar 26, 2018 5:23:55 GMT -7
Just finished 4G Crown Gears in 15T and 19T. I used a different resin for these to see difference in resins. I now have 15T, 16T, 17T, 19T, 20T crown gears for the 4G. I am working on a series for the DR1. As of now I have a 22T gear, however the 20T may work in this setup.
|
|
|
|
Post by Eagle Racing on Mar 28, 2018 8:49:26 GMT -7
Got my CNC mill finished. I bought a kit, thought I would start small. Learn how to use it and progress to a larger machine. I already have a few designs for slot car parts ready in Fusion 360. 
|
|
|
|
Post by GTS on Mar 28, 2018 10:01:41 GMT -7
Got my CNC mill finished. I bought a kit, thought I would start small. Learn how to use it and progress to a larger machine. I already have a few designs for slot car parts ready in Fusion 360.
That's awesome! Will be anxious to see what you produce! |
|
|
|
Post by dave632 on Mar 28, 2018 14:04:22 GMT -7
Will be interesting to see what you make with it. How about an armature winding machine!
|
|
|
|
Post by Eagle Racing on Mar 31, 2018 5:24:41 GMT -7
Got my CNC mill finished. I bought a kit, thought I would start small. Learn how to use it and progress to a larger machine. I already have a few designs for slot car parts ready in Fusion 360.
That's awesome! Will be anxious to see what you produce! I have several projects in mind. This allows me to work with stronger materials. |
|
|
|
Post by AJR on Mar 31, 2018 8:07:09 GMT -7
Moving into the high tech fields I see! Awesome cuzzo! I can hardly wait to see what you've got going on.
|
|
|
|
Post by Eagle Racing on Apr 13, 2018 12:39:13 GMT -7
Anglia Pro Mod fitted with a DR1 chassis.
|
|
|
|
Post by ecbill on Apr 13, 2018 16:34:17 GMT -7
Sharp looking car! Do you have Alfred E. Newman at the wheel?
It would be wild to have him up against Curley in Dave's car.
|
|
|
|
Post by dave632 on Apr 14, 2018 8:36:29 GMT -7
That would make a good race  |
|
|
|
Post by kiwidave on Apr 15, 2018 3:57:31 GMT -7
I've always liked the 4 gear casting Anglia.
|
|
|
|
Post by Eagle Racing on Apr 17, 2018 15:02:15 GMT -7
Thanks fellows for kind words and thumbs up on Anglia. Been real busy and having fun with CNC mill project.
|
|
|
|
Post by Eagle Racing on May 8, 2018 13:35:15 GMT -7
Here is a sneak peak at what I have been busy designing. This is my new carbon fiber inline chassis. I have both long and short versions. Now that the major design work is done I will begin testing the chassis.
 |
|
|
|
Post by GTS on May 8, 2018 14:14:14 GMT -7
Very, very cool !!!
|
|
I will be sharing that build on Slot Car Illustrated Forum under Eagles Projects. When I do a scratch built drag chassis I will share it here. I have used ball bearing bushings before in a 4G Front Engine Dragster (FED). They are also Super Glued in. 
