|
|
Post by FlatBlackCamaro on Feb 26, 2015 16:34:12 GMT -7
My stock 4Gears from AW will take on any of you and drag you to the finish line!
Sorry guys... i felt left out.
|
|
|
|
Post by dave632 on Feb 26, 2015 17:09:51 GMT -7
No need to be left out.
How about a 2 out of 3 grudge run against one of my AFX 3 gears or one of my sons. He sent a 68 and a 70 Camaro, I sent a Vega and a Chevelle. Your choice as to which one. I would suggest some kind of handicap since they all have 6 ohm armatures in them.
Do yo want to run at 18 volts?
|
|
|
|
Post by pceng on Feb 26, 2015 18:07:18 GMT -7
and drag you to the finish line! If I weren't so arrogant , I'd be scared :-) .......... confidence doesn't run in your loins ...... it gallops ! ........ lol. Jeez 4yrs & I still can't get the quote thing right ! |
|
|
|
Post by FlatBlackCamaro on Feb 26, 2015 19:18:30 GMT -7
No need to be left out. How about a 2 out of 3 grudge run against one of my AFX 3 gears or one of my sons. He sent a 68 and a 70 Camaro, I sent a Vega and a Chevelle. Your choice as to which one. I would suggest some kind of handicap since they all have 6 ohm armatures in them. Do yo want to run at 18 volts? Thats a whole lot of slot tech jibber jabber im too new to figure out yet... but if its a challenge... I ACCEPT.   Peter, im not smart enough to be afraid. LOL |
|
|
|
Post by pceng on Feb 26, 2015 20:34:24 GMT -7
Yo Fools,... Have fun til my s**ts built.....  Oh Yeah! As you have described your build, so shall you deliver.  Everytime I see this thread........ this come to mind........ still cracks me up. .............. Peter |
|
|
|
Post by AJR on Feb 26, 2015 20:37:38 GMT -7
No need to be left out. How about a 2 out of 3 grudge run against one of my AFX 3 gears or one of my sons. He sent a 68 and a 70 Camaro, I sent a Vega and a Chevelle. Your choice as to which one. I would suggest some kind of handicap since they all have 6 ohm armatures in them. Do yo want to run at 18 volts? Thats a whole lot of slot tech jibber jabber im too new to figure out yet... but if its a challenge... I ACCEPT. Peter, im not smart enough to be afraid. LOL |
|
|
|
Post by dave632 on Feb 27, 2015 8:37:01 GMT -7
No need to be left out. How about a 2 out of 3 grudge run against one of my AFX 3 gears or one of my sons. He sent a 68 and a 70 Camaro, I sent a Vega and a Chevelle. Your choice as to which one. I would suggest some kind of handicap since they all have 6 ohm armatures in them. Do yo want to run at 18 volts? Thats a whole lot of slot tech jibber jabber im too new to figure out yet... but if its a challenge... I ACCEPT. Peter, im not smart enough to be afraid. LOL Most new 3 and 4 gears come with 14 ohm armatures. That is a disadvantage in a drag race vs a 6 ohm. I would suggest a race against the Chevelle which was the slowest of the cars I sent in. We can run heads up or with a spot , your choice. |
|
|
|
Post by dave632 on Feb 27, 2015 8:46:31 GMT -7
Thats a whole lot of slot tech jibber jabber im too new to figure out yet... but if its a challenge... I ACCEPT. Peter, im not smart enough to be afraid. LOL Yes Jeff, arrange a 2 out of 3 for us. The White/Orange Chevelle is elected as my car for the race. If there is a handicap we can start with some car lengths, which have not been determined yet. |
|
|
|
Post by pceng on Feb 27, 2015 9:05:35 GMT -7
Does this need to be put on the race calendar?? Not sure how to handicap, but I'm sure we can figure something out. Let me know....grudge races are fun Yes Jeff, arrange a 2 out of 3 for us. The White/Orange Chevelle is elected as my car for the race. If there is a handicap we can start with some car lengths, which have not been determined yet. Without any comparison before hand, handicapping will be guess work. If both cars could be run for time. Then a short ironing out of car lenghts could take place between parties. Just suggesting.......... Peter |
|
|
|
Post by pceng on Mar 2, 2015 15:25:59 GMT -7
Changed threads......... have to be able to claim I'm only fooling......
but if........ one was to drill out somebodys bore on their pinion gear then fill with ........oops , wrong chassis. You guys make me think of inlines............NEVERMIND.
Hmmm , if cars are at track this would be for future reference....... NEVERMIND !
|
|
|
|
Post by dave632 on Mar 2, 2015 16:12:59 GMT -7
Grudge race with Flat I off for now as he is not entering this race.
|
|
|
|
Post by SKR on May 6, 2015 18:09:31 GMT -7
 Sounds about right!!!!!! Too soon? |
|
lewis
Pro Stock
Posts: 220
|
Post by lewis on May 6, 2015 23:09:30 GMT -7
Haha that's a bad a## shirt. I want one
|
|
|
|
Post by sjracer on May 7, 2015 16:04:50 GMT -7
Hey Alpink,
This Texas/Chicago collaboration has me a tee bit worried, can I borrow your book of Sgrigonometry? Unfortunately, I misplaced mine three years ago when I moved.
|
|
|
|
Post by SKR on May 27, 2015 21:43:01 GMT -7
Eagle/Jeff,
Is this what your tracks look like? I saw this on Comp Plus and thought you might get a kick out of it with all the flooding going on.
|
|
Oh Yeah! 
