|
|
Post by dave632 on Aug 25, 2014 19:48:33 GMT -7
The 4g that are running on 26v are the unlimited (highly modified) and Top Fuel (moderatley modified). Unlimited needs that voltage(amps)to run properly. Top Fuel was more to make it faster than the M/FC which is basically the same build and runs at 24v. Need higher volts (amps) to make those run as well. They are mean greens with poly mags. Doorslammers run at 18v. Pretty much the same setup with ceramic mags. Then stock which runs at 13.8. Street runs at 13.8v and Pro Street at 18v. The 4g and the 3g chassis are not far off one another at comprable voltages and builds. Tjet Leadsled is running at the Curse of the Hearse in October and Nostalgia Pro Stock tjet at the Finals in Nov. Break out those tjets and enter both of those. That would be great! Also N/FC 4g runs in Nov. too. One of your 4g gears would be legal for that one. Give it a try. Like Ninja said next year I think the door could possibly open up for the older AFX 3g stuff. I will look into those classes. |
|
|
|
Post by ninjatek on Aug 26, 2014 4:51:52 GMT -7
Thanks JJ. Cordell, put me on the list for Street and one FED. Hopefully I'll get a MT/F together this weekend. I might have a second FED as well. I built it over the weekend, just haven't tested yet. Thanks You are on the list at #20 for Street and NTF classes. Welcome to the race! |
|
|
|
Post by Doug412 on Aug 26, 2014 10:56:32 GMT -7
Hauler rolled out for Bear Creek today. Good Luck Racers
Race On Doug412
|
|
|
|
Post by AJR on Aug 27, 2014 19:07:00 GMT -7
Going to have the Eagle film crew at Bear Creek to catch some of the racing action!! Thank you Robert!! This is shaping up to be a really good event...that's the goal anyway. Once again sponsors have stepped up with some great giveaway items. Be sure and remember them when you need parts, bodies, etc. This has been a record year for the NTRA and they have given all year long!!Bear Creek Labor Day Nationals sponsors:- NTRA (Cordell Steward)- Eagle Racing- Hairy Canary HO slot car resins- Lucky Bob's- Boneyard Racing- R & D Racing- Angry Jeff Racing- J. Cruz PerformanceThanks to all of you for your help and sponsorship!! 8 DAYS TILL THE LABOR DAY NATIONALS!!
|
|
|
|
Post by AJR on Aug 27, 2014 19:10:20 GMT -7
Hauler rolled out for Bear Creek today. Good Luck Racers Race On Doug412 |
|
|
|
Post by Doug412 on Aug 28, 2014 3:46:03 GMT -7
Cordell made up the Avatar for me as a Race Poster but i shrank it down to fit  No smoke and mirrors for me just good running cars... Eagle hope that bike is tuned cause the Nova is! The crew should be there today without Dragula in tow  but The Graveyard Shift should make for a good F.E.D. show!! Hope y'all can handle that Munster.. T.I.A.for hosting this one, Race On Doug412 |
|
|
|
Post by ks1933 on Aug 28, 2014 4:48:28 GMT -7
I am so pumped about Bear Creek, I can't wait until race day. The new hauler will be leaving tomorrow morning, ya ol K.S. broke down and bought a new hauler and uniforms for the crew. He even let those crazy guys called the surfers load their rail on the hauler too, they loaded a bunch of mops on the hauler said they were for mopping the competition. This next week is going to go sloooow any way GOOD LUCK to every one next week end.
........Dennis |
|
|
|
Post by pceng on Aug 28, 2014 8:54:03 GMT -7
Just finished motor on 32' . Linkage rod looks huge in pic. Ok by eye............ mmmmmm  Gotta try some pistons out before sending them to ya....  32' is on t-jet chassis, 33' is on what is left of 4g (bottem plate, pick-ups and rear axle pocket). Next coupe will be 3 window 33' black w/chrome. Need to find a few more motor parts in chrome to make it work. New pistons aren't working out so good, so 33' will get loaded up as is for trip to Bear Creek. ........ Peter |
|
|
|
Post by AJR on Aug 28, 2014 12:11:31 GMT -7
Peter finally some pics. Did you do these with your phone or otherwise? Cars look great!! Thanks for sharing.
|
|
|
|
Post by Eagle Racing on Aug 28, 2014 13:04:52 GMT -7
Here is a pic of one of my N/TF ready to be assembled. That is the hurt motor. It looks okay but it isn't. The drag bike is ready Doug.
|
|
|
|
Post by TGM2054 on Aug 28, 2014 15:22:14 GMT -7
Well the cars headed out today, hopefully they make it in time they didn't go priorty mail. Oh well thats the way it goes.
|
|
|
|
Post by TGM2054 on Aug 28, 2014 15:37:20 GMT -7
Just finished motor on 32' . Linkage rod looks huge in pic. Ok by eye............ mmmmmm Gotta try some pistons out before sending them to ya.... 32' is on t-jet chassis, 33' is on what is left of 4g (bottem plate, pick-ups and rear axle pocket). Next coupe will be 3 window 33' black w/chrome. Need to find a few more motor parts in chrome to make it work. New pistons aren't working out so good, so 33' will get loaded up as is for trip to Bear Creek. ........ Peter Peter where did you get those, they would make awesome altereds! |
|
|
|
Post by AJR on Aug 28, 2014 16:57:14 GMT -7
Here is a pic of one of my N/TF ready to be assembled. That is the hurt motor. It looks okay but it isn't. The drag bike is ready Doug.
|
|
|
|
Post by pceng on Aug 28, 2014 17:24:35 GMT -7
Thanks guys, Doug took the pics at his place this morn. Bodys are resin , molded die cast. Simple bodies fun part is motor. Yellow 33' is going to race. Have to send it to at least one. Green FED is sitting this one out. Want to see what roadster will do with tires attached to the wheels this time.
........ Peter
|
|
|
|
Post by Eagle Racing on Aug 28, 2014 19:38:29 GMT -7
Peter those are fun bodies, had mine set up to fit a Super G+. Still have the mold laying around here somewhere. Look forward to seeing it at the race. Jeff, thanks I dig the drag bikes. Like I said I will build you one. I am reworking the chassis. It will be 3D printed. I have more upgrades planned for the bike. It will be a lot faster than it is now, when complete.
|
|
but The Graveyard Shift should make for a good F.E.D. show!! Hope y'all can handle that Munster.. T.I.A.for hosting this one, 
