|
|
Post by ninjatek on Sept 21, 2014 20:28:22 GMT -7
Cordell please enter 1 for PM Hearse. You are on the list at #12 for PM Hearse. Welcome to the race! |
|
|
|
Post by ks1933 on Sept 22, 2014 5:26:12 GMT -7
For the race coming up in the pm hearse class, I know this question has been asked before but I can't find it. Are the rules unlimited like the outlaw and n/tf, is any chassis legal to run and any modifications? I know it is run on lower voltage. I have been struggling with this for a couple of days.
..............Thanks, Dennis |
|
|
|
Post by Doug412 on Sept 22, 2014 5:40:07 GMT -7
For the race coming up in the pm hearse class, I know this question has been asked before but I can't find it. Are the rules unlimited like the outlaw and n/tf, is any chassis legal to run and any modifications? I know it is run on lower voltage. I have been struggling with this for a couple of days.
..............Thanks, Dennis Yes Hearses are ANYTHING GOES!! We won't be making this a CLASS (Outlaw all the way) Custom builds for fun!! Race On Doug412 |
|
|
|
Post by ks1933 on Sept 22, 2014 5:50:51 GMT -7
For the race coming up in the pm hearse class, I know this question has been asked before but I can't find it. Are the rules unlimited like the outlaw and n/tf, is any chassis legal to run and any modifications? I know it is run on lower voltage. I have been struggling with this for a couple of days.
..............Thanks, Dennis Yes Hearses are ANYTHING GOES!! We won't be making this a CLASS (Outlaw all the way) Custom builds for fun!! Race On Doug412 Thanks Doug |
|
|
|
Post by dave632 on Sept 22, 2014 15:02:31 GMT -7
I have both of my Hearse cars ready now. 59 Caddy arrived, body not the greatest, found it on E bay, but it looks OK. Both are running decent on 13.5 volts which I have been testing at.
I also checked the output on an Auto World wall transformer, they claim 800ma at 13.5 volts. This equals about 11 watts which is better than previously thought. I then checked the output voltage unloaded and it was over 18 volts. As soon as you put a load on it however the voltage dropped sharply but I think it maintained close to 13 volts at near 1 amp.
Are you running a transformer for each lane? If so these cars may run quicker than we think.
|
|
|
|
Post by Doug412 on Sept 22, 2014 15:07:01 GMT -7
22 volt walwart on each lane..
|
|
|
|
Post by pceng on Sept 22, 2014 15:31:37 GMT -7
22 volt walwart on each lane.. Doug, and I went through a few to find ones that match. Both 22 & 13v. Also have MRC power supplies , variable but only to 22ish volts. Not to worry - - - BOTH LANES RUN EQUAL ! ! ! |
|
|
|
Post by dave632 on Sept 22, 2014 15:49:37 GMT -7
Sounds good, I have been checking the cars at 13.5 which should give a good indication of how they will run.
|
|
|
|
Post by Doug412 on Sept 22, 2014 18:15:06 GMT -7
|
|
|
|
Post by kdog on Sept 23, 2014 14:08:58 GMT -7
Herman was a lucky Munster.....I'm just sayin.... |
|
|
|
Post by Doug412 on Sept 25, 2014 2:18:21 GMT -7
 Yes yes a few names still not on the list Sam and Cordell come out come out where ever you are... Ps. Yes i saw that but SKR is not listed NOW. If the sled was 14ohms it can run in Ratts where mine is.. and Bondo well he's Cursed from last season and won't be attending.. A few new names this Curse, hope they ready!! We do have fun here on the Darkside... Baahaha |
|
|
|
Post by Eagle Racing on Sept 25, 2014 3:36:51 GMT -7
Sam was one of the first to sign up for leadsled. Cordell gave him #3, but it looks like it has been assigned to another racer.
|
|
|
|
Post by SKR on Sept 25, 2014 3:45:45 GMT -7
Had Cordell pull my entry. I'm not sure if I'll have a sled done in time. Don't count me out yet  |
|
|
|
Post by Doug412 on Sept 25, 2014 12:20:29 GMT -7
Attention Attention Race On Doug412
|
|
|
|
Post by mike11422 on Sept 28, 2014 17:34:08 GMT -7
Ninja,
Please scratch my lead sled entry and add a PM Hearse entry for me. Thank you.
|
|
