|
|
Post by sjracer on Jul 9, 2016 8:27:59 GMT -7
|
|
|
|
Post by AJR on Jul 9, 2016 11:19:22 GMT -7
Can someone post pics of braids and shunts installed? Thanks also Sam what voltage are the pso running? Mac this is how I do my braids and shunts. Been doing them like this for awhile now........just another method. Shunt doesn't interfere with pick up operation like this. Braid is used on 1/32 cars. This is a 4g chassis that I built and redid the shunts on for another racer, but my PSO setup will be the same.   |
|
|
|
Post by 79malibu on Jul 9, 2016 14:29:27 GMT -7
Thanks guys for the info.
|
|
|
|
Post by nosubfor3 on Jul 9, 2016 14:30:21 GMT -7
I have a question. Where do you people get poly magnets for magnatraction chassis?
|
|
|
|
Post by sjracer on Jul 9, 2016 14:50:39 GMT -7
There was a guy on eBay, nacho magnets I believe. Bsrt also made them.
|
|
|
|
Post by nosubfor3 on Jul 9, 2016 14:53:14 GMT -7
There was a guy on eBay, nacho magnets I believe. Bsrt also made them. I have a set from BSRT. But they do not sell them anymore. And I believe Nach is belly up also.  Does anyone zap magnets on the site here? Or know where I can send my magnets to get zapped and matched?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 9, 2016 15:25:06 GMT -7
I have a zapper and Nacho polys.
message me
understand that zapping can only restore magnets to their original potential
and
only ceramic magnets can be zapped by a non-commercial zapper.
so
that means I can only zap ceramic magnets and they will be as strong as they were designed to be.
I don't run a service per se, but I can oblige a few members
|
|
|
|
Post by 79malibu on Jul 11, 2016 11:58:28 GMT -7
So who is interested in running the next pso outlaw race?
|
|
|
|
Post by AJR on Jul 13, 2016 19:02:52 GMT -7
Mac I'm working out the details on a PSO event in early September. I will hopefully announce it in the next couple of days.
|
|
|
|
Post by AJR on Jul 13, 2016 19:08:21 GMT -7
There was a guy on eBay, nacho magnets I believe. Bsrt also made them. I have a set from BSRT. But they do not sell them anymore. And I believe Nach is belly up also. Does anyone zap magnets on the site here? Or know where I can send my magnets to get zapped and matched? Vince Jag Hobbies sells poly magnets for MT/XT. Right side of menu about 2/3 way down under NeoDM magnets. They don't say they are poly till you put them in your cart. $7pr. Good deal. Hoslotcarracing.com also has them, but they are very proud of them at $17.99pr. If you don't trust Jags description then give me a couple of days because I just ordered some. I can let you know how they are. Jeff |
|
|
|
Post by 79malibu on Jul 15, 2016 17:24:24 GMT -7
Jeff what voltage are the pso run at?
|
|
|
|
Post by AJR on Jul 15, 2016 18:01:41 GMT -7
PSO will run at 18v. Event has now been announced.
|
|
|
|
Post by SKR on Jul 20, 2016 17:10:58 GMT -7
an update to the chassis rules have been made to allow cutting on the chassis for the addition of traction magnets only. You can see the rules earlier in this thread or click on "Pro Street Outlaws" on the forums navigation bar below the Nitro logo.
|
|
|
|
Post by dave632 on Jul 27, 2016 20:14:36 GMT -7
So who is interested in running the next pso outlaw race? I will send entries in for the next event. If I am reading it right 1 entry is allowed for the race and 2 for challenge list racing. That class fits about 50 of the cars I have. Beware of using poly magnets that are to strong for a mean green arm. I have had some cars slow down with them. They 60' good then fall off after that. |
|
|
|
Post by AJR on Jul 28, 2016 9:00:00 GMT -7
Dave Pro Street Outlaw (PSO) is the top 5 list and you are only allowed one entry. The Match/Grudge racing limit is two cars per racer. It sounds like we are going to have more cars for match racing than for the PSO at this point. The Kiwi racers are sending 6 or 7 cars for match racing against the forum members that accept the challenge. As I get more info on their cars I will post. As far as I know right now they are stock 4 gear builds with AW dragster or Funny car bodies. Waiting on some pics of the cars from them now. Thanks.
Jeff
|
|
