|
|
Post by AJR on Aug 23, 2018 15:53:00 GMT -7
Questions: Inline Stock
1. Ceramic motor magnets. Must be only ceramic or ceramic grade? 2. 2 traction magnets. Any composition or ceramic only? 4 Gear Super Comp
1. Traction magnets. Again, any composition? Please pardon all the questions I have been asking lately regarding rules but having more than enough racing history under organized rules (slots and 1:1), the one thing I have learned is clarification of rules. I have been out of the HO racing arena for 11-12 years so I am not up to speed on what "stock" is these days. Guess if an old 440-X2 comes out on toip, I won't need to be to concerned about "these days"!!!  Cozee the questions are not a problem at all and I completely agree with you on rules and rules clarification. Let me answer your specific questions and then comment. Inline stock 1) Whatever stock magnet came in the chassis you are running. Ceramic on most. Now with that being said, there are a couple of exceptions to the rules here. I am allowing the Jag Hobbies TR3 and DR1 chassis to be included which have polymer motor magnets. I do not believe they have an unfair advantage, or they have not shown that and have already been allowed in at least one other race. Also, I have not excluded the BSRT G3 chassis which probably does have an advantage. That was kind of an oversite on my part, but with just over a month till the race, I am not going to exclude them now. 2) Traction magnets......once again whatever came stock on the chassis. I think most had neos, but I could be wrong. So again....whatever came stock on the chassis you are using. I will do my research and find out if needed. 4 gear Super Comp 1) Traction magnets can be any composition. Only two located in the stock positions and also of stock dimension.....or close to it. No giant magnets please. Hope this answers your questions. Feel free to ask away if you need to. NTRA 2018 rules: nitroslots.com/page/ntra-rules |
|
|
|
Post by J.L.M Racing on Sept 2, 2018 16:04:07 GMT -7
Will there still be a 2.5/2.8. Ohm Inline Super Comp: Working on a 2.8 that I think you guys will love to see..
|
|
|
|
Post by J.L.M Racing on Sept 2, 2018 16:12:55 GMT -7
Sory ment Comp 2.4/2.8...ceramic Motor Mags..
|
|
|
|
Post by GTS on Sept 2, 2018 16:56:04 GMT -7
Makin' some progress on the Hairy Canary Bantam for the 4G SC. Still got a little bit of detailing and a few decals to do.
This is the third attempt at a paint job on another of Hairy Canary's excellent castings  . Gonna let this one be it. Brush in a little detail and be satisfied. Sits on a Jag TR3, inline stock.
They didn't turn out as nice as I'd have liked but I do have my limitations  . Just gonna keep tryin'! |
|
|
|
Post by AJR on Sept 2, 2018 17:55:36 GMT -7
Will there still be a 2.5/2.8. Ohm Inline Super Comp: Working on a 2.8 that I think you guys will love to see.. Hello Wendell. Unfortunately no Inline Comp Class. I am running Inline Stock and 4 Gear Super Comp for this race. I know I would still like to see what you're working on. Thanks for asking. |
|
|
|
Post by AJR on Sept 2, 2018 18:03:23 GMT -7
Makin' some progress on the Hairy Canary Bantam for the 4G SC. Still got a little bit of detailing and a few decals to do. This is the third attempt at a paint job on another of Hairy Canary's excellent castings . Gonna let this one be it. Brush in a little detail and be satisfied. Sits on a Jag TR3, inline stock. They didn't turn out as nice as I'd have liked but I do have my limitations . Just gonna keep tryin'! They look great to me Gale! Two Hairy Canary classics. I went through my body drawer last week and found one each of those. Yes....I was smiling . Can't wait to run yours down the track. I see you are running the DR-1 rear wheels on your 4 gear. Far superior wheel. Stock 4 gear wheels are junk. Thanks for sharing. |
|
|
|
Post by dave632 on Sept 2, 2018 18:15:32 GMT -7
Will there still be a 2.5/2.8. Ohm Inline Super Comp: Working on a 2.8 that I think you guys will love to see.. Will have an event in early December, Fall nationals which will include Inline Super comp. |
|
|
|
Post by GTS on Sept 3, 2018 1:15:28 GMT -7
They look great to me Gale! Two Hairy Canary classics. I went through my body drawer last week and found one each of those. Yes....I was smiling . Can't wait to run yours down the track. I see you are running the DR-1 rear wheels on your 4 gear. Far superior wheel. Stock 4 gear wheels are junk. Thanks for sharing. Thanks Jeff! Hope they make it down the track . Yeah, I know whatcha' mean about those stock wheels. Had one wobblin' so bad on the AW TF Dragster that I suspected a bent axle. Replaced the rear wheels with the Jag units and the problem went away.  I'm not impressed with the AW 4G shoes either but they are at least usable. Haven't put the braids on them yet but looking forward to the improvement.
G
|
|
|
|
Post by hairycanary on Sept 5, 2018 21:50:29 GMT -7
Makin' some progress on the Hairy Canary Bantam for the 4G SC. Still got a little bit of detailing and a few decals to do. This is the third attempt at a paint job on another of Hairy Canary's excellent castings . Gonna let this one be it. Brush in a little detail and be satisfied. Sits on a Jag TR3, inline stock. They didn't turn out as nice as I'd have liked but I do have my limitations . Just gonna keep tryin'! Gale very nice. Outstanding detail. Looks like the 33 fits the TR3 chassis good. Thank You for posting the pictures. Can't wait to see on the track. Rick |
|
|
|
Post by hotwheels on Sept 11, 2018 13:30:15 GMT -7
Hey Jeff,please put me down for 2 cars in the rookie class. Guess that's where I belong as I have only ran a few of Dave's races and never made the finals. I just need to swap out some bods to meet the rules. Also switch my shoes to non-braid. Thanks for hosting another race,Jeff. And also thanks to Dave 632 for posting this event on SCI.
|
|
|
|
Post by AJR on Sept 11, 2018 13:53:54 GMT -7
Hey Jeff,please put me down for 2 cars in the rookie class. Guess that's where I belong as I have only ran a few of Dave's races and never made the finals. I just need to swap out some bods to meet the rules. Also switch my shoes to non-braid. Thanks for hosting another race,Jeff. And also thanks to Dave 632 for posting this event on SCI. Hotwheels you are in the show at #11 and #12. Welcome to the race! |
|
|
|
Post by dave632 on Sept 12, 2018 18:08:17 GMT -7
Good luck at the event Hotwheels.
|
|
|
|
Post by hotwheels on Sept 18, 2018 14:25:47 GMT -7
Thanks JJ & Dave. Cars will ship Monday. Was going to change gears but found my answer to track length here on the site. This is such a great and easy place to navigate. Most of the answers are there!
Pat.
|
|
|
|
Post by dave632 on Sept 19, 2018 13:06:26 GMT -7
|
|
|
|
Post by AJR on Sept 19, 2018 14:23:33 GMT -7
I will be looking for them Dave.
|
|
. Gonna let this one be it. Brush in a little detail and be satisfied. Sits on a Jag TR3, inline stock.
. Just gonna keep tryin'!
