Post by AJR on Aug 12, 2018 15:44:00 GMT -7
Angry Jeff Racing
660slots.com
Jag Hobbies
Hairy Canary
Dave632
Gnome
Cozee
| Car # | Inline Stock Rookie | Inline Stock Veteran | 4 Gear Super Comp |
| 1 | Steve | Ecbill | Ecbill |
| 2 | Mazda | Ecbill | Ecbill |
| 3 | Mazda | Sandfly | Sandfly |
| 4 | GTS | Hairycanary | Hairycanary |
| 5 | GTS | Hairycanary | Hairycanary |
| 6 | Triple52 | Alpink | Alpink |
| 7 | Triple52 | Gnome | Gnome |
| 8 | Mustangpaul | Gnome | Gnome |
| 9 | Kstocks | JJWallace | GTS |
| 10 | Kstocks | JJWallace | GTS |
| 11 | Hotwheels | Dave632 | Dave632 |
| 12 | Hotwheels | Dave632 | Dave632 |
| 13 | Hilltop | Alpink | Alpink |
| 14 | Cozee | JJWallace | |
| 15 | Bondoman2k | JJWallace | |
| 16 | Bondoman2k | Steve | |
| 17 | Kiwidave | Steve | |
| 18 | Kiwidave | Cozee | |
| 19 | Kstocks | Bondoman2k | |
| 20 | Hilltop | Bondoman2k | |
| 21 | Nosubfor3 | Kiwidave | |
| 22 | Cozee | Kiwidave | |
| 23 | Mustangpaul | ||
| 24 | Mpr32 | ||
| 25 | Hilltop | ||
| 26 | Hilltop |
Inline Stock (Rookie) and Inline Stock (Veteran) 20v
No braids or shunts
5.5 ohm min factory armature *no balancing or custom winds*
Ceramic motor magnets
Traction magnets allowed *2 only*
Any gear
No silly foam tires *no other wheel/tire restrictions*
No chassis modifications (I will allow chassis cutting on the DR-1 in the traction magnet area only)
Wheelie bars allowed
Neutral timing on any adjustable timing chassis
Jag TR 3 and DR 1 chassis allowed
**Musclecar type Street body**
**No lexan**
4 Gear Super Comp 24v
Braids and shunts allowed
5.5 ohm min factory armature *no custom winds*
Balancing allowed
Polymer grade motor magnets
Traction magnets allowed *2 only*
Any gear
Any wheel/tire
Wheelie bars allowed
Conventional motor brush set up *no wet comm, etc.*
**Modern Top Fuel, Nostalgia Top Fuel, Fuel Altered type body**
**No lexan**
Pro Street Outlaw Current List Order 9/1/18
| 1) | Dave632 | "Rebel" 57 Nomad |
| 2) | JJWallace | "Dream Crusher" Mustang |
| 3) | Nosubfor3 | "Blue Silk" Corvette |
| 4) | Hilltop | "Grady" 55 Bel Aire |
| 5) | Gnome | "Grimace" Charger |
| 6) | Hairy Canary | "Vicious" Vette |
| 7) | Ecbill | "Steeler" Corvette |
| 8) | Kiwidave | "Villian" Cuda |
| 9) | Eagle Racing | "Snakebit" AC Cobra |
| 10) | SKR | "Slayer" Mustang |
Four Gear Outlaw Current List Order 9/1/18
| 1) | JJWallace | "Leihua's Rose" Thunderbird |
| 2) | Dave632 | "Jungle Jim" Camaro |
| 3) | Hairy Canary | "Aces Wild" Willys |
| 4) | Ecbill | "Blue Streak" Charger |
| 5) | Kiwidave | "Kiwi Racing" Thunderbird |
| 6) | Gnome | "Dreamcycle" Monza |
| 7) | Nosubfor3 | "Purple Haze" 57 Chevy |
| 8) | Hilltop | "Comp Cams" Camaro |
| 9) | Eagle Racing | "Sinister" Daytona Charger |
| 10) | SKR | "Rattler" Nova |
Pro Street Outlaw Call Outs 9/21/2018
1) Kiwidave CO Ecbill for #7
2) Hilltop CO Nosubfor3 for #3 spot
3) JJWallace CO Dave632 for #1 spot
4) Nosubfor3 CO for #2 pending outcome of CO2
5) Ecbill CO Hairy Canary for #6 pending outcome CO1
6) Gnome CO for #4 spot
7) Hairy Canary CO for #5 spot pending outcome of CO5
8) Cozee CO for #8 spot
Four Gear Outlaw Call Outs 9/21/2018
1) Kiwidave CO Ecbill for #4 spot
2) Hilltop CO Nosubfor3 for the #7 spot
3) Dave632 CO JJWallace for the #1 spot
4) Nosubfor3 CO Gnome for the #6 pending outcome CO2
5) Ecbill CO Hairy Canary for #3 pending outcome CO1
6) Gnome CO for #5 spot pending outcome CO4
7) Hairy Canary CO for #2 spot pending outcome CO5
These are the updated Lists going into the Texas Nationals. To get on one of the Lists, a racer would build a car to Class specs and Call Out the #10 spot. If more than one racer wants on the List, they would go into the "Shark Pool" and go through a Round Robin type elimination for a chance to Call Out the #10 spot. It is entirely possible that one or more racers that are on the Lists will not show up. They will drop no more than 2 spots and the racer below them can still Call Out for the spot above them. If those racers are #9 or #10 they will fall off the Lists and that will open the spot up for whoever wants it if a car has been sent. Only one car per racer can be on a List. A racer can only Call Out the spot directly above them. There are typically two Rounds of races at each event and only one Call Out per Round. I think that's pretty much it. Sounds complicated, but it's really not. All that stuff is for me to worry about anyway. All YOU need to do is build it and send it and we will make sure you get a fair shot at the Spot or List.
These are the current PSO and 4GO rules in use. They are basically Pancake Comp rules with a few additional specifications.
Chassis Build | PRO STREET OUTLAW and FOUR GEAR OUTLAW |
Tires | Any slip on tire/wheel combo combination. Double flanged wheels allowed Tire diameter not to exceed .490" (PSO) and Unlimited (4GO) max diameter. Tires must not be wider than wheel used. |
Gears | Original top plate gears only. Any crown gear may be used. Gears may be blueprinted. |
Armature | Any factory wound armature. No lower than 5.0 ohm. Blueprinting permitted. No de-winding or timing adjustments allowed. |
Motor Magnets | 2 motor magnets max. Ceramic material only, Dash magnets are permitted. Magnets may be shimmed with non ferrous, non magnetized material. Magnets may be glued into place. |
Chassis | Top plate must be of same mfg. as chassis. Blueprinting is permitted. No cutting on chassis or top plate Only one guide pin. Chassis may be cut for the addition of traction magnets and the relocation of the guide pin to properly fit a car body. |
Traction Magnets | Allowed, no more than 2. |
Electrical | Readily available. Stock or stock replacement. Braid and shunt wires are allowed. |
Body | (PSO) Body must have doors and fenders. (4GO) Doorslammer type body. Body mounts maybe repositioned. Only hard plastic, injection molded or resin bodies allowed. Scoops, wings, parachutes etc...are optional. |
Miscellaneous | Wheelie bars and up to 2 traction magnets can be used. Ballast is permitted but must not be visible from the outside of body. |
