2023 NTRA Summer Slam June 29 - July 2

Steve, with all due respect, sincerely, we hope folks are accountable for their own actions and teching entries is almost never done.
this is no secret and if/when we get racers that take advantage, they are dealt with privately until/unless it becomes necessary to call them out publicly.
I applaud you for making this well known about the arms and those differences. 
it is not my decision to make and I am sure that Sam is giving it a good review along with seeking other folks advice.
I think that when it comes to a 3 OHM difference in armatures (everything else being equal) the ET's and MPH will tell the difference. 
I totally agree with you that it needs to be announced OHM limits for the bikes.
remember the 3.5 OHM Mattel TYCO armatures?
some folks tried to sneak them into "stock inline" and the same could be done with the bikes. 
I think that "stock" means STOCK, but sometimes specifics must be documented.
I completely understand folks who are running serious racing events with points and maybe money on the line.
my view of Nitro-Slots racing was that we want to have fun.
Nitro-Slots race hosts rarely have the manpower that other organizations have or the time to tech every entry.
if one gets teched, they all should be teched.
thus comes in the "honor" idea of sending only legal cars.
at one of JJ's recent races, I sent the wrong class t-jets and was DQed (well he just didn't qualify or race them, he was very nice about it) and I felt somewhat embarrassed because I didn't check them before sending.
it was a simple mistake and JJ recognized that so he was a gentleman about.
thus recognizing the difference between a mistake and something else.

I make this offer to all racers. if you need a trophy so badly that you have to go outside guidelines to achieve it, let ME know how big of a trophy you want and what YOU want the plaque to say, and I will provide it, shipped to you free of charge.

Steve, thank you for pointing this out and I am sure it will be well addressed in time to prepare the bikes.

 

Summer Slam
My Favorite Month of the year ROTFLMAO

Eric I had to get my official NitroSlots decoder ring out to decipher your secret message ROTFLMAO Only thing I could come up with to add is.... and you might be one of few that can interpret this Dirka Dirka Jihad !!

We got two categories for tyco bikes in Summer Slam.

With the motorcycle being a fun class for us ,and a possibility of other host holding the class. I have decided to run the tyco motorcycle as inline super stock NTRA rules. Changes have been made above...

Now for those that may not want to modify their bike so much I have available the Evil Canary Challenge. Chance at the track record on a stock bike .... details above.

No it can't be cut and you can't drill a hole either. Jag does have a stronger traction magnet you can use.

If you already cut it or drilled a hole , you can fill it in some manner just don't use magnet dust in the mix lol

Steve, I think that Sam Skillet is just going by the NitroSlots rules which came into being before he was a member.