|
|
Post by Eagle Racing on Jan 30, 2017 6:30:28 GMT -7
Here is my take on a 32 Ford hot rod. It is setting on a BSRT G3 with stock armature and braid. It loves 55 Chevy's for lunch....what say you Dave632....up for a MATCH RACE at Jeff's race in March....This time any gearing, stock armature and braid.
 |
|
|
|
Post by hilltopspeedway on Jan 30, 2017 10:34:45 GMT -7
Cool looking Hot Rod...RM
|
|
|
|
Post by Eagle Racing on Feb 22, 2017 14:41:31 GMT -7
One of my resin cast 70 Chevelles as a Door Slammer. It is setting on an Auto World Super III chassis. It is modified and way faster than a typical AW Super III. CIMG1011 by Robert Shell, on Flickr
|
|
|
|
Post by AJR on Feb 22, 2017 18:59:47 GMT -7
Hey.....I have one of those. Did this one a few years ago that I got from you. Different spoiler and blower....this one sits on a narrowed 4 gear chassis.
|
|
|
|
Post by hilltopspeedway on Feb 23, 2017 7:37:52 GMT -7
Those Chevelles's are looking good...RM
|
|
|
|
Post by Eagle Racing on Feb 27, 2017 5:53:49 GMT -7
Here is a photo of my latest project. I have been modifying the AW Super III to be a better performing chassis. The chassis in the back has factory pickup system. The bike chassis has a Mega G system....  They say a picture is worth a 1000 words, so here goes.
|
|
|
|
Post by Eagle Racing on Feb 27, 2017 14:41:15 GMT -7
Here is my latest drag bike setting on a AW Super III, with the Mega G pickup system.
 |
|
|
|
Post by Eagle Racing on Mar 12, 2017 12:07:04 GMT -7
This is my take on a Bantam AA/Fuel Altered body. I based this off Harry Canary awesome casting. Mine did not come out quite as nice as his but it will do. I modified it to set lower and it is designed to fit the Auto World Super III chassis. The chassis pictured is far from a standard AW Super III. This one features Neo 42 motor magnets. I set this up with an extremely wide air gap. The chassis is a project I am working on and is a work in progress. The chassis also features my 3D printed 6 spoke Corvette wheels front and rear. If you look at the traction magnets, you will see they are pushed up in the chassis. The Neo 42's are very strong mags. Even with a large rear tire the down force is tremendous.
   |
|
|
|
Post by nosubfor3 on Mar 12, 2017 12:38:12 GMT -7
Interesting the Mega shoes fit. Which Mega G? 1.5 or 1.7 wheel base. How do they compare to the Super III?
|
|
|
|
Post by Eagle Racing on Mar 12, 2017 14:15:55 GMT -7
The mod uses the 1.7 Mega G. They are easier to adjust and the contact around the brush barrel is superior to AW design, IMHO.
|
|
|
|
Post by AJR on Mar 13, 2017 15:59:47 GMT -7
Looks sweet! Hope you will be bringing it to make some runs down the track!
|
|
|
|
Post by Eagle Racing on Mar 24, 2017 7:13:43 GMT -7
Here are some on my latest casting projects. There are several in the photo that are on going projects, but for drag racers the three up front are for you. The Grand Torino, 64 GTO, and a Pontiac Grand Prix. I got Jeff to work over a NASCAR body I gave him, thanks cuzzo...  I needed to stay on some road racing projects like the Chaparral 2A in the back ground. The Vickey in the back with the green on it is next up to finish out. Lots of parts to this one.  |
|
|
|
Post by hilltopspeedway on Mar 24, 2017 14:11:17 GMT -7
Cool products from ER Racing...RM
|
|
|
|
Post by Eagle Racing on Apr 26, 2017 6:40:42 GMT -7
Here is one of my current projects. This is a wrap/big decal going onto a Pro Mod Corvette that will fit a 4G chassis. This is being discussed on another thread SCI. So thought I would share it here. The wrap is a large decal for some they think of it as one decal that wraps the car. For me I think of it as several large decals that wrap the car. In the picture I used one decal for sides, roof, hood and you can see the front decal in picture to be added. For me doing it this way cuts down on decal wrinkles. Once you ad Micro Set these large decals can stretch.  |
|
|
|
Post by AJR on Apr 26, 2017 17:14:03 GMT -7
Very cool stuff here cuzzo! I can remember several of your wraps that turned out awesome. That is something I have not tried. Would like to see finished car for sure.
|
|
They say a picture is worth a 1000 words, so here goes.
I needed to stay on some road racing projects like the Chaparral 2A in the back ground. The Vickey in the back with the green on it is next up to finish out. Lots of parts to this one.