|
|
Post by Eagle Racing on Jun 25, 2018 6:13:09 GMT -7
Here is a photo of the alloy wheels that I made from the lost wax casting. The first carbon fiber chassis I do will be a drag chassis. I thought it would be cool to have some custom metal matching wheels.
|
|
|
|
Post by Eagle Racing on Jul 25, 2018 7:28:13 GMT -7
The Carbon Fiber chassis is finished and ready to go. Here is a picture of one of the chassis with my metal alloy wheels. I am thinking of doing kits with unfinished bodies. The setup in the picture ready to run with unfinished body would run around $69. The motors would be whatever you choose 6ohm, 3.3ohm, 2.3ohm. Like everything else I do I build these one at a time in my shop.  CIMG1309 by Robert Shell, on Flickr |
|
|
|
Post by steve1138 on Jul 25, 2018 10:21:24 GMT -7
That is so Badazz!!
|
|
|
|
Post by sandfly on Jul 25, 2018 12:01:20 GMT -7
|
|
|
|
Post by hilltopspeedway on Jul 25, 2018 12:50:20 GMT -7
You've come a long way since the land was first purchased in 2011...(first thread pic)!!! Might be time to relocate if you keep growing...
Good stuff from ER...RM
|
|
|
|
Post by AJR on Jul 25, 2018 13:09:24 GMT -7
Saaaweeeeet!! $69 sounds like a great deal to me. Lovin that '57!
|
|
|
|
Post by hairycanary on Jul 26, 2018 10:28:02 GMT -7
The Carbon Fiber chassis is finished and ready to go. Here is a picture of one of the chassis with my metal alloy wheels. I am thinking of doing kits with unfinished bodies. The setup in the picture ready to run with unfinished body would run around $69. The motors would be whatever you choose 6ohm, 3.3ohm, 2.3ohm. Like everything else I do I build these one at a time in my shop. CIMG1309 by Robert Shell, on Flickr Robert that kit looks really good. When your ready to sell them I would like to purchase a kit. I've been doing a little testing on the crown gears I got from you. The red resin gears I got over 75 plus passes on them. I didn't lap them, I just put them in and ran them. Super smooth and quiet. I've been using a 4G Outlaw chassis at 18V. Next I will be testing the grey resin gears. Thank Robert for letting me try them. So far there very impressive. Rick |
|
|
|
Post by Eagle Racing on Jul 27, 2018 5:44:30 GMT -7
Thanks I am glad you like! I have a couple more chassis ideas in the works. |
|
|
|
Post by Eagle Racing on Jul 27, 2018 5:48:44 GMT -7
You've come a long way since the land was first purchased in 2011...(first thread pic)!!! Might be time to relocate if you keep growing... Good stuff from ER...RM LOL...that was a lot of fun back in the day. Got a little burned out and have not really been racing so much. I needed something different and this is it. I love the design work and the testing. |
|
|
|
Post by Eagle Racing on Jul 27, 2018 5:52:19 GMT -7
Saaaweeeeet!! $69 sounds like a great deal to me. Lovin that '57! I am glad you like Jeff!! I have had a ton of fun designing it and testing it. |
|
|
|
Post by Eagle Racing on Jul 27, 2018 6:07:32 GMT -7
The Carbon Fiber chassis is finished and ready to go. Here is a picture of one of the chassis with my metal alloy wheels. I am thinking of doing kits with unfinished bodies. The setup in the picture ready to run with unfinished body would run around $69. The motors would be whatever you choose 6ohm, 3.3ohm, 2.3ohm. Like everything else I do I build these one at a time in my shop. CIMG1309 by Robert Shell, on Flickr Robert that kit looks really good. When your ready to sell them I would like to purchase a kit. I've been doing a little testing on the crown gears I got from you. The red resin gears I got over 75 plus passes on them. I didn't lap them, I just put them in and ran them. Super smooth and quiet. I've been using a 4G Outlaw chassis at 18V. Next I will be testing the grey resin gears. Thank Robert for letting me try them. So far there very impressive. Rick Rick you are the first to give me feed back on the gears, thank you sir!! This chassis will also have my gears. The new 8T pinion for the N20 1mm shaft I designed has also held up nicely to road racing. I will send you a PM when I have the kit ready, thank you. |
|
|
|
Post by dave632 on Jul 27, 2018 9:53:19 GMT -7
Lookin good Robert.
|
|
|
|
Post by bondoman2k on Jul 28, 2018 7:10:44 GMT -7
Hey Robert. I LOVE these chassis and motors! I can think of a lot of bodies to use on these!  I know we haven't talked in a LOOOONG time. I need some stuffs!! lol. You got a website? need some parts pretty desperately here. Getting geared up to do some racing again. |
|
|
|
Post by bondoman2k on Jul 28, 2018 7:12:15 GMT -7
Nevermind...I found your website. LOL |
|
|
|
Post by Eagle Racing on Jul 30, 2018 5:19:54 GMT -7
It has been a while bondoman2k. Parts? What are you looking for?
|
|
I know we haven't talked in a LOOOONG time. I need some stuffs!! lol.