|
|
Post by Eagle Racing on Jul 30, 2018 6:33:46 GMT -7
Will be updating my website with new info on chassis, wheels, gears and motors this week. The N20 can motor I now have 2 ohm, 3 ohm, 4 ohm, 5 ohm, and 6 ohm. These will be the motors I use in the Carbon Fiber chassis kit.
|
|
|
|
Post by Eagle Racing on Jul 31, 2018 7:09:02 GMT -7
Here is another new wheel design I call it the Wave. I will be casting this one next real soon. Just thought I would give a sneak peak.
 |
|
|
|
Post by Eagle Racing on Aug 1, 2018 5:07:32 GMT -7
Here is a pic of the the motors I now have available for the Carbon Fiber Chassis.
|
|
|
|
Post by gnome on Aug 1, 2018 6:04:57 GMT -7
Those came out great looks like a good design
|
|
|
|
Post by Eagle Racing on Aug 2, 2018 7:20:34 GMT -7
Updated my website and listed chassis price with unfinished body, motor of choice 2,3,4,5, and 6 ohm available, 8T pinion with crown gear, lead wire, braid and of course the carbon fiber chassis with Neo52 adjustable traction magnets. The price is $45 with free shipping in USA.
I am trying to keep the price down. I will be showing some test results with ETs real soon.
|
|
|
|
Post by Eagle Racing on Aug 8, 2018 5:12:58 GMT -7
Here are a few pics of the chassis completed with a 57 Chevy body and a set of my new wheels.
 |
|
|
|
Post by gnome on Aug 8, 2018 5:33:06 GMT -7
Them look like they could be little bullets. Nice looking car
|
|
|
|
Post by Eagle Racing on Aug 19, 2018 7:53:31 GMT -7
They are a ton of fun and with the adjustable wheel base fit just about any bodies in 1/64 scale.
|
|
|
|
Post by Eagle Racing on Aug 20, 2018 6:46:42 GMT -7
I am always looking for ways to improve a race car. Although some of the improvements require some testing to verify they work. Here are a couple ideas, one for sure works the other will require some testing. In the first pic I have made a brass sleeve for an 8T factory pinion. The sleeve fits the N20 motor perfect, just bond with black Loctite 380. I make a 8T resin pinion that works, but they will not last as long as a factory pinion. As resins improve that may change. The second pic is a set of resin bushing on a Viper axle. I will be testing these in one of my Carbon Fiber chassis setups. Always looking for ways to improve.
|
|
|
|
Post by GTS on Aug 20, 2018 7:21:42 GMT -7
Very cool!
I've read where the Lifelike pinions are supposed to fit the N20 motor shafts. I know Terry carries them on his site but can't remember the tooth count.
G
|
|
|
|
Post by Eagle Racing on Aug 20, 2018 11:45:54 GMT -7
Thank you! True, Terry does carry the Lifelike pinion. It is a 7T pinion. That I know of nobody makes an 8T pinion except my 3D resin pinion for the N20 1mm shaft motor. I also make a 9T 3D resin pinion for the 1mm shaft. They are however not as durable as the factory plastic ones.
|
|
|
|
Post by Eagle Racing on Aug 29, 2018 5:52:04 GMT -7
As I said always looking for ways to improve. Once I started testing the resin bearing I decided I did not like it. So I went in a different direction. Here is a photo of new pillow block design featuring a brass bushing. This design still allows the axle to be snapped in and out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 29, 2018 8:38:20 GMT -7
the chassis is charming.
working on a bushing addition to mine as well.
nice innovations
|
|
|
|
Post by cozee on Aug 29, 2018 9:19:06 GMT -7
Do you sell just the motors?
|
|
|
|
Post by Eagle Racing on Aug 29, 2018 13:45:17 GMT -7
Do you sell just the motors? I have been know to sell a few motors. Send a PM and let me know what you are looking for. |
|
