|
Post by SKR on Jan 16, 2017 7:03:49 GMT -7
Entry's now open. Bear Creek will be hosting match races as well.
There will also be Pro Street Outlaws list racing, get your call outs posted now in the official call out thread.
# |
Super Stock T-jet
| Door Slammer 4G Comp (25 gram minimum) | 1.
| GYMI
| GYMI
| 2.
| Dave632
| Dave632
| 3.
| SKR
| SKR
| 4.
| Dave632
| Dave632
| 5.
| ecbill
| ecbill
| 6.
| Angry Jeff
| Angry Jeff
| 7.
| Clyde
| Angry Jeff
| 8.
| Clyde
| Hairy Canary
| 9.
| Marz4545
| 79malibu
| 10.
| Marz4545
| Clyde
| 11.
| nosubfor3
| Clyde
| 12.
| nosubfor3
| Eagle Racing
| 13.
| Hilltop
| Eagle Racing
| 14.
| 440GTX
| Marz4545
| 15.
| 440GTX
| Marz4545
| 16.
| KiwiDave
| nosubfor3
| 17.
| KiwiDave
| nosubfor3
| 18.
|
| Bluesguy
| 19.
|
| JimRussell
| 20.
|
| JimRussell
| 21.
|
| ALEXDALERacing
| 22
|
| ALEEXDALERacing
| 23.
|
| Hilltop
| 24.
|
| Hilltop
| 25.
|
| KiwiDave
| 26.
|
|
| 27.
|
|
| 28.
|
|
| 29.
|
|
| 30.
|
|
| 31.
|
|
| 32.
|
|
| 33.
|
|
| 34.
|
|
| 35.
|
|
| 36.
|
|
| 37.
|
|
| 38.
|
|
| 39.
|
|
| 40.
|
|
|
Bear Creek Dragway ( North Texas) jjwallace, Race Master
- Timed section is 1/64th scale 1000ft ( 15' 7" ) w/ 3ft of shutdown into pillow box.
- Max Trax dragstrip
- Mastech HY3010E 0 - 30v 0 - 10a power supply
- Trackmate basic timing system
- Utilizing IR emitters mounted in a gantry over start and finish as light source for IR sensors
- Measured rail height is .014 - .017
- Track support is constructed MDF 20' long x 16" wide table
- Controllers are (2) Parma 60ohm
Status: race ready; NTRA regulation 1000' drag racing
|
|
|
Post by SKR on Feb 1, 2017 17:50:42 GMT -7
Entry list now open.
|
|
|
Post by marz4545 on Feb 1, 2017 19:06:28 GMT -7
Just one car per class? Is there a single thread for class rules?
|
|
|
Post by AJR on Feb 2, 2017 6:35:40 GMT -7
Just one car per class? Is there a single thread for class rules? Here is the rules link. It can also be accessed by clicking "2017 NTRA rules" at the top of the page.
nitroslots.com/page/ntra-rules
2 cars per class. A race flyer will be posted soon that gives more race details. NTRA is introducing 4 gear Outlaws at this event utilizing the Comp rules with Doorslammer bodies. The initial list order will be set in Qualifying. Although 2 cars may be entered for the race, Only the top car from each racer will be acknowledged for the 4 gear Outlaw list.
|
|
|
Post by marz4545 on Feb 2, 2017 16:01:57 GMT -7
So if I entered 2 cars in the 4g super comp class it would be for qualifying and then one spot?
|
|
|
Post by AJR on Feb 2, 2017 17:22:10 GMT -7
So if I entered 2 cars in the 4g super comp class it would be for qualifying and then one spot? That is correct. Your two entries would race in the Doorslammer Class race and your top qualifying car would take a spot on the 4 Gear Outlaw list. One thing.........it is 4 gear Comp rules..........not Super Comp. There will be no call outs for 4 Gear Outlaw at this event. We are just setting the list.
|
|
|
Post by marz4545 on Feb 2, 2017 18:42:36 GMT -7
So if I entered 2 cars in the 4g super comp class it would be for qualifying and then one spot? That is correct. Your two entries would race in the Doorslammer Class race and your top qualifying car would take a spot on the 4 Gear Outlaw list. One thing.........it is 4 gear Comp rules..........not Super Comp. There will be no call outs for 4 Gear Outlaw at this event. We are just setting the list. Cool, thanks for the info, gonna try to get some entries in for my son and i!
|
|
|
Post by Gymi on Feb 3, 2017 20:23:02 GMT -7
Put me down for one Super Stock T-Jet and one 4 Gear Outlaw. I have a Charger with an HCS AMG 2.5 Ohm inline, Pro 4mags on a viper chassis if anyone would like to take it on.
|
|
|
Post by AJR on Feb 4, 2017 6:02:54 GMT -7
Put me down for one Super Stock T-Jet and one 4 Gear Outlaw. I have a Charger with an HCS AMG 2.5 Ohm inline, Pro 4mags on a viper chassis if anyone would like to take it on. Welcome Gymi. I might have something comparable that I can run against your inline. It's just been sitting in the box for awhile. What voltage did you have in mind?
|
|
|
Post by AJR on Feb 4, 2017 7:06:09 GMT -7
Bear Creek Dragway track records for classes running at the 2017 Winter Nationals.
Doorslammer (4 gear Comp) .728et @ 18v ** Doorslammer will run at 20v for this race and the 4 Gear Outlaws**
Pro Street Outlaw (MT/XT Comp) .659et @ 18v
Super Stock Tjet * This will be the first time that Super Stock Tjets have run at B.C.
Here are a couple of important links:
Pro Street Outlaw Official Call Outs nitroslots.com/thread/4197/street-outlaws-official-call-thread
2017 NTRA Rules nitroslots.com/page/ntra-rules
|
|
|
Post by dave632 on Feb 4, 2017 8:10:30 GMT -7
Put me down for 2 in each class. I will have to build these cars as I have few 4 gears and all my T jets are modified. Inlines however I have lots and lots of and I would like to join in on the 2.5 Challenge. Fortunately I just bought a batch of AFX chassis from the internet so I have a lot of stock armatures.
I would also like to put out an inline Super Stock challenge, 6 ohm, braid allowed, stock type magnets, production chassis.
|
|
|
Post by ecbill on Feb 4, 2017 9:39:54 GMT -7
Definetly one Tjet SS and PSO car.
My one and only 4gear is on the way to New Zealand. Is there much chance they'll be back in time? Guess it may be time to add a few. Anybody have some for sale?
2.5 & 6 ohm inline match races sound good. I'll send one for each.
|
|
|
Post by SKR on Feb 4, 2017 10:04:32 GMT -7
on the list, welcome to the race Gymi, Dave632 & ecbill.
|
|
|
Post by Gymi on Feb 4, 2017 10:42:35 GMT -7
Put me down for one Super Stock T-Jet and one 4 Gear Outlaw. I have a Charger with an HCS AMG 2.5 Ohm inline, Pro 4mags on a viper chassis if anyone would like to take it on. Welcome Gymi. I might have something comparable that I can run against your inline. It's just been sitting in the box for awhile. What voltage did you have in mind? What ever voltage you would like to run at I'm fine with.
|
|
|
Post by dave632 on Feb 4, 2017 12:38:33 GMT -7
|
|