|
|
Post by nosubfor3 on Mar 22, 2021 13:50:36 GMT -7
What Bill said.😃 I agree. Me also. |
|
|
|
Post by dave632 on Mar 29, 2021 9:17:57 GMT -7
|
|
|
|
Post by ecbill on Mar 30, 2021 8:58:04 GMT -7
Was tinkering with inlines for pure stock between coverages of Saturday’s race. A few showed some promise.
One Tyco was particularly fast but it has braids and poly motor mags. We’ll have to see how it does with those pulled.
Another Tyco shows promise. It ran the 2nd best time with badly tarnished electrical parts.
A few Blazin Brakes/Speed Shifters showed potential. Glad it was decided to require factory gearing. 25T won’t fit in these chassis. The faster ones don’t want to keep the pin the slot. That orange Z28 I ran a few years ago did well with out trac mags. Hoping to recreate that magic. Don’t recall if it had a wheelie bar, back then. It does now, plus trac mags.
A Mega G and SG+ we’re not too far behind, so they’re still in the mix.
It’s nice to play with some different cars.😎
|
|
|
|
Post by dave632 on Mar 30, 2021 12:12:02 GMT -7
Bill that is the Spirit of the pure stock class. Trying different chassis to see which one has the
potential to run well right out of the box. I have some Tyco's, Super Magnatraction, and a couple of
other cars that can run right with the Super G+ cars and in some cases are quicker and faster. No wheelie
bar will surely make it a challenge for some of the chassis. None will have braid so a better pickup system
should have the advantage. I will not be running in the class at my race but hopefully someone else will
run the class in the future so I can give it a try.
Dave
|
|
|
|
Post by dynomike on Mar 30, 2021 14:52:23 GMT -7
A Mega G and SG+ we’re not too far behind, so they’re still in the mix. It’s nice to play with some different cars.😎 Doesn't the mega g+ have a 3.5 ohm arm? |
|
|
|
Post by ecbill on Mar 30, 2021 14:54:05 GMT -7
A Mega G and SG+ we’re not too far behind, so they’re still in the mix. It’s nice to play with some different cars.😎 Doesn't the mega g+ have a 3.5 ohm arm? Haven't taken a meter to it yet. Hope not. It runs like a 6ohm. |
|
|
|
Post by dynomike on Mar 30, 2021 16:10:44 GMT -7
The lifelike T has a 3.5 ohm arm also I think. I will check tomorrow.
|
|
|
|
Post by dave632 on Mar 31, 2021 7:29:45 GMT -7
Rules state 6 ohm arm but some come with 5.7-5.9 which will be accepted.
|
|
|
|
Post by dave632 on Mar 31, 2021 8:07:30 GMT -7
Have to make a change to the rules for the upcoming race.
I will be running all classes, including Pancake unlimited at 20 Volts. I noticed in testing the real hot winds the pancakes are pitting the rails on my track on the positive side and it gets worse with a voltage increase.
|
|
|
|
Post by dave632 on Mar 31, 2021 8:46:49 GMT -7
Great news Super Tires will once again be sponsoring our Event. Thanks again to Nick at Super Tires.  Super Tire banner
|
|
|
|
Post by dynomike on Apr 1, 2021 17:06:02 GMT -7
I just checked the stock armature on my life like "t" car and it measures 3.1 ohm. The "m" cars are 6 or more.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 1, 2021 17:36:53 GMT -7
dynomike, I think the motor magnets in the "T" chassis are NEO also.
can you verify?
|
|
|
|
Post by dynomike on Apr 1, 2021 18:58:53 GMT -7
I'm not sure, but they are very strong. With a short tire and lite body, the t is a good road race car.
|
|
|
|
Post by chriskingsley65 on Apr 2, 2021 11:39:46 GMT -7
Hey guys need some help finding some tires that are good for racing . looking for .480 - .500
|
|
|
|
Post by dynomike on Apr 2, 2021 13:54:24 GMT -7
|
|
