|
|
Post by dave632 on Jul 9, 2021 14:20:25 GMT -7
New aluminum 4 gear top plate with gears. Found this on e bay. # 265218511439 I will assemble it and let all know how it works out. No Crown gear yet but that is supposedly in the works.  4 Gear top plate kit |
|
|
|
Post by crazynski on Jul 9, 2021 16:57:33 GMT -7
Dave,
It looks very slick!
Add an aluminum tub, and we're on our way to machined perfection.
Thanks for posting.
|
|
|
|
Post by AJR on Jul 9, 2021 17:18:18 GMT -7
New aluminum 4 gear top plate with gears. Found this on e bay. # 265218511439 I will assemble it and let all know how it works out. No Crown gear yet but that is supposedly in the works. 4 Gear top plate kitGame changer right here. I ordered one for now. Should be getting it any day. I'm wondering if it will work with the Wizzard 20t crown?? At least until we have some other options hopefully. |
|
|
|
Post by dave632 on Jul 9, 2021 18:55:56 GMT -7
I will assemble it with a plastic crown for now and see how it works.
|
|
|
|
Post by ecbill on Jul 9, 2021 19:09:16 GMT -7
New aluminum 4 gear top plate with gears. Found this on e bay. # 265218511439 I will assemble it and let all know how it works out. No Crown gear yet but that is supposedly in the works. 4 Gear top plate kitUhoh, looks like some assembly required. Are instruction included? |
|
|
|
Post by ecbill on Jul 9, 2021 19:23:38 GMT -7
New aluminum 4 gear top plate with gears. Found this on e bay. # 265218511439 I will assemble it and let all know how it works out. No Crown gear yet but that is supposedly in the works. 4 Gear top plate kitUhoh, looks like some assembly required. Are instruction included? Ran into a problem with my Afx 3 gear plate. It wouldn’t fit in the throat of any of the gear presses to install the arm gear, so I cut out the front cross bar. Looking at your disassembled unit, got me to wondering if you could press the arm onto the brass piece, then slide it through the hole in the aluminum piece, for assembly. |
|
|
|
Post by skillet on Jul 9, 2021 21:10:48 GMT -7
Kind looks like you assemble the whole brass piece with arm and gears then put it on the plate like Bill's saying?
|
|
|
|
Post by skillet on Jul 9, 2021 21:13:45 GMT -7
I hope it works but I hope it doesn't stop us from Frankensteining our own 4gears for unlimited. I like seeing what we come up with.
|
|
|
|
Post by crazynski on Jul 9, 2021 22:39:01 GMT -7
We can scratch build these top plates?
|
|
|
|
Post by skillet on Jul 9, 2021 22:39:55 GMT -7
In 4 gear unlimited you can
|
|
|
|
Post by crazynski on Jul 9, 2021 22:51:35 GMT -7
Oh my. Old Betsy is going to get all worked up over this.   |
|
|
|
Post by ecbill on Jul 10, 2021 5:59:53 GMT -7
Old Betsy is pretty cute. Does she have have any sisters?  |
|
|
|
Post by dave632 on Jul 10, 2021 7:57:26 GMT -7
The printed instructions that come with it are not the best. I will have to sit down with this
when I am in the mood to figure it out. There is no assembled picture, you have to look at the one in the ad.
|
|
|
|
Post by gnome on Jul 10, 2021 10:28:16 GMT -7
 Mine assembled fairly easy after reading the instructions. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 10, 2021 11:30:23 GMT -7
and, there ya go
|
|
