|
Post by dave632 on Jun 15, 2024 14:05:21 GMT -7
Smoky mountain Fall Tyco event moved to November 22nd -24th. Coming in November 22-24, 2024, will be an all-Tyco event. Tyco stock and super stock, any Tyco chassis will be allowed. Details will follow.
|
|
|
Post by dave632 on Jun 16, 2024 17:11:04 GMT -7
Classes will be: Stock = Any stock Tyco chassis, HP7, Curve hugger, 440 etc. Plastic or cast type bodies only, max rear tire size .470. Drag, muscle car bodies preferred.
Tyco Stock = Any stock Tyco chassis, HP7, Curve hugger, 440 etc. Stock gearing, brush's, armatures, pickups, motor magnets, traction magnets. Max tire .470. A pretty low cost to run class.
Super Stock = minimum 5.7 ohm arm, ceramic magnets, braids OK, shunts OK, any gearing, max tire .610, any traction magnets, stacked OK.
A request was made for a Tyco speed and ET record. If you want to join in welcome.
Drag or muscle car bodies preferred, but if all you have is something else you can still run. 2 traction magnets. Wheelie bars recommended. Minimum weight 21 grams in stock, 19 in SS. I am not that worried about traction magnets. Let's not get rule happy here. Remember this is supposed to be something we do for fun. MY track has dynamic braking for 3', steel stop strips for 3' + catch box with foam and towels when needed. 15.5', 1000' 1/64 scale, running at 20 volts all classes. 2 cars per class, no limit on record attempt cars. 3 attempts per car PSO and 4GO list races will be held after the event.
Dave Vince 1929 Grenada Blvd. Knoxville, Tn. 37922 8.00 for normal shipping, add more for extra insurance. Please include your screen name and car classes with instructions. Any Cars/parts/gifts for racers are appreciated. Pay Pal davev632@gmail.com
|
|
|
Post by cozwurth on Jul 24, 2024 1:56:20 GMT -7
Dave, Is the speed & ET record portion a 'no holds barred, run what ya brung' type thing? Sounds interesting.
'other' Dave
|
|
|
Post by dave632 on Jul 24, 2024 9:13:28 GMT -7
Yes, speed and ET record will be for any Tyco based chassis, anything goes. I will give this a try myself.
|
|
|
Post by Racin' Rob on Jul 27, 2024 15:36:30 GMT -7
I would send a car for the speed and et challenge.
|
|
|
Post by cozwurth on Jul 28, 2024 5:38:49 GMT -7
Dave, what voltage will you be running for each class?
'other' Dave
|
|
|
Post by dave632 on Jul 28, 2024 9:07:49 GMT -7
15.5', 1000' 1/64 scale, running at 20 volts all classes. Everyone is welcome to go for the ET and speed records.
|
|
JW
Pro Stock
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
you can follow my YouTube channel @jwmoor
Posts: 162
|
Post by JW on Jul 28, 2024 16:56:28 GMT -7
Dave Question, in super stock it says 5.7 ohm arm minimum. Does that mean 5.7 and below/less or 5.7 ohm and above? JW
|
|
|
Post by dave632 on Jul 29, 2024 18:04:33 GMT -7
Anything 5.7 and above. Most Tyco arms measure in the 6.0 + range, I just allowed a little leeway.
|
|
|
Post by finistauri on Jul 30, 2024 10:56:52 GMT -7
Dave Sign me up for Two In each Class Fin
|
|
|
Post by dave632 on Jul 30, 2024 12:54:21 GMT -7
Will do as soon as I set up the board Fin. Welcome back to Smoky mountain.
|
|
|
Post by carla60 on Jul 31, 2024 4:55:02 GMT -7
Dave Sign me up for 2 Tyco Stock And 2 Super Stock. Thanks ,Car-La60
|
|
|
Post by dave632 on Aug 1, 2024 7:23:51 GMT -7
Welcome back to Smoky mountain Carla 60.
|
|
|
Post by dave632 on Aug 1, 2024 7:32:30 GMT -7
Just a word about the unlimited Tyco's. I built a 440 chassis using the supposedly stiff black chassis and found the chassis to be too flexible. Smoked the pinion gear in less than half the track. I built a brace which corrected the problem. I installed it on top of the chassis, it's made out of thin brass sheet. 440 brace
|
|
|
Post by ecbill on Aug 3, 2024 5:59:01 GMT -7
Dave, Please sign me up for 2 in each in stock and super stock. Not so sure about Tyco land speed record.
|
|