|
|
Post by kdog on Dec 24, 2010 13:41:15 GMT -7
My Ashley & John Force, and AAA Funnycars cane today, Nice ! One thing I noticed was that these are molded in Green & Blue plastic, thast a first for AW. I hpoe AW sells a Ton of them and does more Drag Racing subjects  |
|
|
|
Post by scottman2007 on Dec 24, 2010 14:06:14 GMT -7
Those look awsome,now i want to see one slammed!!!!!!
|
|
|
|
Post by SKR on Dec 24, 2010 14:39:12 GMT -7
Heck, I agreed with Sam's idea too.  But I don't want him to get a fat head thinking EVERYBODY votes his way.  Love you too Phil  I was going to ask you if you have been feeling ok..... I see you bought a AW Dragstrip with Pro Stocks!!!! I can only imagine you and Rick setting that track up and lying on the floor running them down the track the next time he visits. We do want a full report. J/K Happy Holidays Buddy! |
|
|
|
Post by kdog on Dec 24, 2010 16:40:04 GMT -7
Heck, I agreed with Sam's idea too. But I don't want him to get a fat head thinking EVERYBODY votes his way. Love you too Phil I was going to ask you if you have been feeling ok..... I see you bought a AW Dragstrip with Pro Stocks!!!! I can only imagine you and Rick setting that track up and lying on the floor running them down the track the next time he visits. We do want a full report. J/K Happy Holidays Buddy! Heck with laying on the floor I am looking forward to running separate Drag races in the Gateway Internationals Timers Both next time they invite Phil to Gateway for a Drag Race, Hell leave yours at home Phil I'll bring mine. Dog |
|
|
|
Post by 440gtx on Dec 25, 2010 13:38:31 GMT -7
Jag hobbies are selling the individual NHRA 4-gears now. They are $19.75 each.
|
|
|
|
Post by SKR on Dec 25, 2010 14:26:42 GMT -7
Lucky Bob's has them for $18.00 each and free shipping if you spend more than $50.00
|
|
|
|
Post by nosubfor3 on Dec 26, 2010 17:01:54 GMT -7
Has anyone measured the out side diameter of the four gear crown gear? If so what is it? If not can someone do so and let us all know. Wizzard has 20 tooth at .380 OD.
|
|
|
|
Post by bondoman2k on Dec 26, 2010 17:40:48 GMT -7
Haven't measured it with any kind of 'accurate device' yet, but I can guarantee that 20t IS larger. I have a stock 15t and a Super2 19t and the 19 is noticably larger. I'll get out my caliper and see what it shows for both gears. (that is if the battery in it hasn't 'expired' yet...lol). Ron (Bondo)  Lonestar Racing and Resins |
|
|
|
Post by sjracer on Dec 27, 2010 16:52:09 GMT -7
Zach ( the new owner of Rabbitracing ) is selling all 8 for $125.00 plus shipping.
|
|
|
|
Post by bondoman2k on Dec 27, 2010 19:29:17 GMT -7
Nosub, in answer to your measurement question: On an original 15t crown gear (Aurora) the outside dimension is .274,.275. On an original Super2 (Aurora) 19T crown gear: .329, or .330. I used two measurements because there are some 'burrs' on the outside of these gears, like I said they're new . So, the .380 is definitely quite a bit larger. I don't have an AW 4 gear taken apart at the moment to measure it, not too sure if it's not a different tooth anyway, since the new 4 gears armatures are a different ohm rating than the older ones were, which may mean they are geared completely different. Will need to check on that. Ron (Bondo) Lonestar Racing and Resins |
|
|
|
Post by nosubfor3 on Dec 28, 2010 5:14:16 GMT -7
Thanks Ron. The AW gear looks to be the same as the standard AFX. I had a few disected chassis laying around. I still don't understand changing the crown gear thing. I tried to put an AW and a AFX in the four gear but it is to tall and the gear plate will not sit flat.  |
|
|
|
Post by TGM2054 on Dec 28, 2010 10:23:47 GMT -7
If your using an original 4gear plate the opening that the crown fits through is smaller in corners, Kind of a D shape,if you take an exacto and make it a rectangle your crown gear should fit through.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2010 10:57:46 GMT -7
We got a brand new built HO Drag track up in MT HOLLY NJ........ we will be running the 4gears..........
I think out of the box is good for the prostock cars .. tuning blancing
the funny cars you should allow arm mods , shunts , braids
just my .2 cents
I'm a 1/24th scale racer...
there is a good 1/24th 1/4 mile track there too
|
|
|
|
Post by mobydidit on Dec 28, 2010 23:24:11 GMT -7
Thanks Ron. The AW gear looks to be the same as the standard AFX. I had a few disected chassis laying around. I still don't understand changing the crown gear thing. I tried to put an AW and a AFX in the four gear but it is to tall and the gear plate will not sit flat. The Auto World gear is .312 in diameter & 18 tooth |
|
But I don't want him to get a fat head thinking EVERYBODY votes his way. 
